- Cost-effective, efficient multi-function unit prints, copies, scans and faxes
- Pre-loaded with 1 solid ink stick of each color for bright, vivid images
- Prints 30 ppm in color and black-and-white; print resolution of up to 2400 dpi; first-page-out in 6 seconds
- Faxes as fast as 3 seconds per page; LAN feature lets you fax directly from your desktop
- Dimensions: 20.9 x 26.2 x 24.4 inches (WxHxD); weighs 93 pounds; 1 year on-site warranty
This miserable printer will make you miserable. I''ve had a list of problems a mile long, Xerox will help you if you have lots of money.
Cons:
EXPENSIVE TO PRINT, POWER ON OR POWER RESET SUCKS $15 WORTH OF INK EACH TIME.
LOUD, "LOUD" IS UNDERSTATING THE NOISE THIS THING MAKES. VERY LOUD.
CONSUMABLES COST A SMALL FORTUNE.
IMAGE QUALITY SUFFERS DUE TO THE FACT IT REALLY IS ONLY CAPABLE OF 600DPI DESPITE THE MILEADING ADVERTISING.
REPLACED PRINT HEAD ONCE VERY EXPENSIVE, NOW THERE IS A HARD DRIVE ERROR. I REPLACED THE HARD DRIVE, STILL HAVE HARD DRIVE ERROR. XEROX SAYS IT''S A POWER SUPPLY PROBLEM.
IT WILL BE A COLD DAY SOMEWHERE WHEN I BUY ANOTHER SOLID INK PRINTER FROM XEROX.
NETWORK SCANNING IS NOT AS EASY AS IT SHOULD BE.
CLEARING INK HEADS WHEN THEY GET CLOGGED CAN BE TIME CONSUMING AND ALSO VERY COSTLY.
I HAVE ONLY USED ORIGINAL XEROX INK INCASE ANYONE WAS WONDERING.
YOU WILL NOT SAVE MONEY PRINTING WITH SOLID INK EVEN IF YOU GET THE 8860 WHCIH IS SUPPOSED TO BE CHEAPER TO RUN.
Buy Xerox 8560MFP/D Phaser 8560 Multi-Function Color Printer Now
I work in IT and work on a lot of printers and multifunction devices. A lot of my clients have the Xerox Phaser 8500 series printers and multifunction devices, and so far they have either been happy with them.The 8560MFP/D is the multifunction version of the Phaser 8560 printer. I reviewed the Phaser, and it''s a great machine. Excellent print quality, fast print speeds, lots of features, simple to use and set up. It had a few gremlins, but they were manageable and nothing major. The MFP is no different. It adds scanning, copying, and faxing abilities. Mechanically, every function works very good. I am especially impressed with the scanner and copier. Scans were completed in less than 6 seconds.
You can do Adobe Postscrip or PCL3, PDF, or JPEG outputs with customizable templates. You can plug it in USB or use it over a network with an ethernet connection. It doesn''t have WiFi capability, but that''s not such a bad thing for a commercial device. It''s good for home users, but WiFi can be too unreliable for a business setting where reliability is key. There are buttons for each function, and a separate menu on the display for each function with its own parameters and settings. The menus were a little confusing to use and there are a lot of functions to navigate through, so there is a learning curve. I think Xerox could have made the menus a little easier to understand, especially for someone who''s not technically savvy, but with that many functions and parameters it would have been difficult.
The instructions were about useless, and I am thinking they''re meant for the IT department. On the plus side, when the printer is first installed, it will print out a status page and configuration pages that include a layout of the various menus and submenus to make navigating them a little easier. I thought that is a very nice touch and so far all of the newer 8500 series ColorCubes/Phasers have this function. The CD-ROM software also includes a set-up video, which is weird because they also include instructions in the box.
The MFP is designed for high volume printing, with a max rating of 6,000 pages or 85,000 images per month. Like the Phaser, this machine uses the same wax ink cubes that make the prints come out with a raised look which makes the text and graphics "pop." The downside is that you can''t hot laminate the prints as the heat would melt the ink and make it smudge. On the upside, you can use the same type of media as traditional laser printers without having to worry about things melting because this isn''t a "thermal" type imaging system. The Phaser works like an inkjet, but the ink for this is actually a waxy liquid that''s sprayed onto the paper in sections, one for each color, and then blended to make different colors. It''s a little like a can of spray paint, except it''s wax. Pretty ingenious.
You can''t really turn it off as the ink is kept in a liquid state inside the machine, and when the power is turned off or it''s reset and the heater stops working, the printer ejects the melted ink into a waste tank to keep it from solidifying and clogging the print head. The ink cubes last a long time, but are expensive at around $140 for a set, and when combined with the fact you have to keep it turned on all the time makes the MFP, like the Phaser, mainly suited for a commercial application. It will hold over 600 sheets of paper up to 32lb stock, and you can add extra storage to it. You could use it at home, but it''s huge and heavy and would take up a lot of space, so not really that practical for a home user.
For all the good things about the MFP, I can testify to the other reviewers'' comments about the dreadful and clunky scanning software. In a word it is horrible. I just did a job to fix a very buggy and unreliable scan utility that would lock up before and during a scan, requiring a force close and sometimes a reboot. I had to go back today to fix the other MFP in the same office that had the same problem. It took 3 hours (lots of money) to rectify the problem and get it working again. That was a good sized bill for the customer for a malfunctioning and buggy scan software. The printer worked just fine, which is what I have come to expect from Epson.
As much as I don''t like the scanner software, I still gave it 4 stars just because I really like the 8500 series. Xerox needs to go back to the drawing board with the scanning software, but otherwise this is a fantastic multifunction machine. The software problem, however, might be enough to deter some buyers. Granted, this is a random occurrance, but still something to keep in mind.
Pro''s:
Great print quality
Fast printing, scanning, and copying
Lots of features
Handles a wide variety of media
Ink lasts a long time
High duty cycle
Con''s:
Unreliable and clunky scan driver
Ink is expensive
Can''t be shut down without wasting expensive ink
So if you own a business or have a need for a quality machine that can handle big print jobs with great print quality in color and monochrome, give the Phaser MFP a look. There are other options out there that offer more in the way of features and user-friendliness, but cost more and can''t handle high print job counts on a single set of inks/toner. My customers are happy with them (Just had another one buy a ColorCube!).
Read Best Reviews of Xerox 8560MFP/D Phaser 8560 Multi-Function Color Printer Here
This is expensive, full of problems and piece of junk machine. Inks cost a fortune and this eats them up (or melts them) even if you are not suing the machine. Takes good five minutes to warm up before any print comes out. Seems like I have to add ink everytime I print and it costs a fortune for a single print. Never buy a solid ink printer from them. Would like to get rid of this for cents let alone dollars.Want Xerox 8560MFP/D Phaser 8560 Multi-Function Color Printer Discount?
You will stand around waiting for this machine each time you use it. This goes for copying, faxing and scanning. This is due to the ink sticks it uses and it has to "warm up" even to send a fax. The Xerox scanning soft ware is poorly designed as well. This is a waste of time and infuriating when you need to get things done quickly. Poor value overall, and after 2 years the machine jams on every page printed now. I am not even going to call out the repair guy. If I can get $50 selling this on ebay it will be good ridance for a dog of a performer. Buy a Fujitsu Scan Snap S510 if you want an excellent scanner.
0 comments:
Post a Comment