Brother BU-100CL Belt Unit for HL-4040CN Save 29% off

• approx. 50,000 page yield on letter size paper

A broken belt unit can lead to bit of a clean-up job inside your printer, so replacing the belt unit is for peace. Changing the belt unit in the Brother duplexing color laser model HL4040CDN simple. With the power switched to "Off", open the front of the printer as if changing toner. Slide out the drum unit until it stops. Remove the drum unit and set it on a clean paper on a table top. Lift the old belt unit out. It lifts from this green tab at the front of the belt unit. It weighs only a couple of pounds so it is easy to lift up and out from the printer. Replacing is the reverse of the process. Note: If you are changing out the excess toner box, it sits right below the belt unit, and that is just one more step to replace. I changed out the excess toner box while changing out my belt unit because it was about due, too. Afterwards the instructions walked me through the procedure to reset the belt unit counter via the on-printer menu. The procedure took 9 minutes in total to change both.

The price is about $25 less via Amazon--delivered--than it is to buy in the local Office Depot.

We have gone 37,000 pages printed thus far in two years. We are on the original drum. There is no toning, and no dots or streaks appearing on the image. The drum is behaving well thus far.

Amazon''s ordering process was easy. Order processing was by the next day. And delivery took 2 days--to Hawaii. And we had selected Super Saver Shipping which was free.

Buy Brother BU-100CL Belt Unit for HL-4040CN Now

The new belt unit came very quickly. Instructions were as good as they ever seem to be;-) Make sure you have room to spread out when you install this.

Read Best Reviews of Brother BU-100CL Belt Unit for HL-4040CN Here

The Belt Unit is OEM, installed and worked as advertised. No problem. I would recommend it. There is nothing more to say, but Amazon wants 20 words, so...

Want Brother BU-100CL Belt Unit for HL-4040CN Discount?

I was skeptical of purchasing this product. I even contacted Brother to make sure it was going to be easy to install. This belt failed on a three year old printer that gets a lot of use, and we had been told that it might be cheaper just getting a new printer. We were told that the parts were too costly but after some research and contacting Brother about the install, I checked for the part and found the best price on Amazon. What would you do spend $89 on this part or $300 on a new printer. We are pleased that the part was exactly as Brother described, very, very easy to install. We hope we are good for another 3 years!

Save 29% off

Cheaper than new unit. Have had much luck with this product in the past. Great service, ships in one piece.