Epson C12C890191 Stylus Pro Ink Maintenance Tank Save 14% off

• Replacement ink maintenance tank
• Compatible with Epson Stylus Pro 4000, 4800, 7800, 7880, 7900, 9800, 9880, 9900, and 11880

The ink tank for the 4800/7800/9800 is a simple plastic box filled with paper absorbent. Thirty five bucks is way too much to pay for such a simple device. You can "refurbish" the tank with a roll of toilet paper. Remove the lid from the tank, remove the cardboard tube in the center of the roll and cut the toilet tissue in half with a bread knife. The two halves will just about fill the box to recreate the absorbent. Here''s the kicker. The printer reads a chip on the tank and remembers the last two tanks, and maybe more. It will not let you reinsert and reuse a recently used tank even if it has been "refurbished". If you have a buddy with the same printer you can switch refurbished tanks to fool the printer.

Buy Epson C12C890191 Stylus Pro Ink Maintenance Tank Now

I was nervous when the right-side maintenance tank on my Epson 9900''s warning light came on 90% full. I had no idea what a maintenance tank was or how difficult it was to change it, but the Epson 9900 guide does warn that if one of the maintenance tanks become completely full, the machine will cease to print. I ordered the part from Amazon, double-checking the tank model #, which should be compatible with my machine. It was delivered quickly. I was amazed how easy it was to change, it just slides right in and out of the machine. Tip to extend the life of your maintenance tank if you have an Epson 9900 or similar model that has a left and right tank, the right tank will fill a LOT faster then the left one, so when you notice the right tank at around 50%, swap the left and right tanks. Also, this tank works on both the right and left sides, they are cross-compatible, so you not need to keep a left-tank and right-tank around, just one backup maintenance tank will be fine, you can use it in either side.

Read Best Reviews of Epson C12C890191 Stylus Pro Ink Maintenance Tank Here

There is not much to this in tank, but you since Epson is the only one who makes it, they can charge a massive profit for it. Amazon is probably the cheapest place to get it though. You can take out the filled absorbent fibers and use lots of tissue or paper towels until you get a new one. But you can''t reset the maintenance tank on the printer from what I know.

Want Epson C12C890191 Stylus Pro Ink Maintenance Tank Discount?

I really like having a spare maintenance tank for my big printer. It is great product. I would always keep one on hand because the printer will not work without it. Thanks great product.

Save 14% off

Great price. Couldn''t find this at any local office supply store. Used for the Epson Stylus Pro 4800 and bought 2, one for now and one for later.