- A paper whose name says it all: multipurpose
- Acid free for great quality that doesn''t deteriorate
- Inkjet and laser guaranteed
- Paper made with 30 percent recycled post-consumer fiber
- 500 Sheets
Showing posts with label duplex printers. Show all posts
Showing posts with label duplex printers. Show all posts
Wausau Exact Multipurpose Paper (32541) Save 19% off
HP DeskJet 3845 Color Inkjet Printer
- Fast, up to 18 ppm printing in black, 14 ppm in color
- Up to 1,200 dpi black resolution, 4,800 x 1,200 optimized dpi color
- Optional 6-color printing; borderless 4-by-6-inch photos
- HP PhotoREt III color; HP PhotoREt IV with optional photo cartridge
- USB connectivity; integrated memory; PC and Mac compatible
I tend to only print out various Word documents and/or website pages, and the speed is not bad. I have also printed out some digital pictures, and they turned our surprisingly sharp. While you could tell they were printed pictures (compared to something like Ofoto), they are nice enough that you could hang around the house. I wouldn''t use this printer primarily for digital pictures, however. While the quality is okay, it''s not great enough that I''d want *all* of my photos to be from this printer.
My only minor complaint is that the cartridges haven''t lasted me as long as the previous HP printer I had. After three months, I had to replace the cartridges which seems fast. It''s one of the main reasons why I recommend not using this for digital pictures (not to mention I''m sure there are better quality printers out there that are geared towards digital photographs). So, yes, this would be fine for printing out pictures occasionally, yes, but not frequently.
One small thing that I like is it prints pages in reverse chron order, page 3, page 2, then page 1. My previous printer printed them page 1 first, page 2, etc., so I had to shuffle through the papers and reorder them. Yes, a minor issue, but it was annoying if you printed more than 10 pages or so.
Overall, I would recommend this printer for the person who doesn''t need to print a high volume of documents (or digital photos). For the home computer user like me, it''s perfect.
Buy HP DeskJet 3845 Color Inkjet Printer Now
After owning another brand for the past few years, and experiencing a lot of technical difficulties and ink problems (the printer heads would get clogged with ink), I went ahead and bought an HP Deskjet 3845. I waited a few months until writing a review to see whether there would be problems that would emerge after regular usage. I am happy to report that this printer is fantastic. The printing quality is great, and the printer is low maintenance. I do not print a high volume of materials, so this printer is great for my home printing needs. Great job, HP.Read Best Reviews of HP DeskJet 3845 Color Inkjet Printer Here
So far no problems, had the printer for about 3 months now, printed about 500 pages and just ran out of ink. A good number of those pages where high quality prints. My last printer was an HP multifunction and it gave me hell, but HP took it back after 6 months and gave me 90% of my money back. So I went simple.Want HP DeskJet 3845 Color Inkjet Printer Discount?
Now, I admit there are definitely printers with more bells and whistles. Sure I would have liked to get one with the scanner/copier/fax, but I was NOT in a position to spend $100.For less than $40, this printer has not given me ANY trouble. I have had NO paper jams. I have had NO "freezing up" or non-responsiveness. I have had NO smears. I use it for both normal printing, and for photo printing.
If you want to print 100 photos, I would recommend going to your local drug store. But to do a few, this printer does the job. For example on Mother''s Day, I gave my mother and my sister photo montage picture frames (you know, they have all the different shaped holes in them), I printed my own photos and put them together. The printer worked just as fast as I did, I could pick up one photo from the printer, get it taped into the frame, and go pick up another one. I can print 4 X 6 photos, I can print 8 X 10 photos, I can print all sizes in-between.
Listen to this! I am STILL ON THE PARTIALLY FILLED INK CARTRIDGES THAT CAME WITH MY PRINTER OVER 6 MONTHS AGO! Even though I use this printer every day! I print photos, emails, recipes, payment receipts for bills, word searches for my niece, coloring pages for my nephew, postage and packing slips and address labels for my eBay business, everything you can think of I print it.
I usually use the default "Quick-Set" for printing, but you can design your own if you need to. When I am printing things for myself I use the "fast/economical" setting. It sure is economical as I said, I have yet to go through the first ink freebies I received. I use the "general/everyday" setting for things I need to look nice. I use the "borderless photo" or "photo with border" settings depending on what I am doing. Or of course, I can manually design my own Quick-Set to use over and over, or I can just change settings on a print by print basis.
I don''t know what more I could ask of a printer for this price. If you don''t need to scan/copy/fax, I would recommend this compact and eye-pleasing workhorse for anyone who doesn''t want to, or cannot afford to, pay more than $40
Brother MFC-3820CN Color Inkjet Multifunction Save $0.04 off
- Color printer, scanner, copier, and fax machine
- 4,800 x 1,200 maximum optimized print resolution; up to 14 ppm print speed
- 600 x 2,400 dpi maximum scan resolution, 36-bit color depth
- 1,200 x 1,200 dpi maximum copy resolution, up to 99 multi-copies
- USB 2.0, digital-camera memory card, and Ethernet interfaces
I agree with the previous post that the scanning software could be better, but most programs have scanner acquisition built in so it''s not a big deal. But I will say that even though the machine has a special button to press for scanning, there isn''t a section in the user''s manual about scanning. Must have been an oversight. But it was not that difficult to figure out. I was totally amazed at how great the print quality was when I printed photos from a Kodak CD that I had made when I processed prints. The prints I made were superior to the photographs in that they were much more vibrant and alive than the photos. I used Epson Glossy Photo Paper which I got at a warehouse club.
I have only used the doc feeder a few times. This was one of the reasons why I chose this machine because the feeder was built better than the competition and it''s a real time-saver. But it has worked flawlessly in the few times I''ve used it. Faxing works great and you can even keep the machine off and it will turn itself on when it senses a fax coming in. Copying is very good too. Print quality is very good, but it''s not laser quality; it''s definitely an inkjet. I have a laser as well, so this does not bother me. I have not used the network feature or the interface for digital camera media.
I did a lot of research on the other products and came very close to buying a similar HP costing about a hundred dollars more. But I am glad I didn''t. This is an amazing machine for the very reasonable price. It''s well built, has a nice fit and finish and works very well. It could be a little smaller, and I also hear that it''s good to cover so that dust doesn''t enter through the paper tray, drying the rollers and interfering with paper uptake. And sometimes it can be a little slow in faxing or printing very high quality photos. Don''t believe the number of pages per minute either, since that''s based on a page with only 5% filled. But those are not deal breakers if you use the machine for what it is intended -it''s not a machine to get if you expect to print a hundred color-saturated pages or photos a day -it''s a light-medium duty machine. Overall, I am extremely happy with my purchase. Hopefully it lasts as long as my last Brother fax of over 12 years -which is still going strong.
One last thing. Don''t underestimate the value to having separate ink cartridges like the Brother. Other companies like HP put all of the colors in one ink cartridge requiring that you buy the entire cartridge when one color runs dry. The Brother has 4 different cartridges assuring that you get your money''s worth from each. This is one of the dirty little secrets to color printers -they sell you the printer cheaply and then you pay through the nose for ink for the printer''s lifetime.
Buy Brother MFC-3820CN Color Inkjet Multifunction Now
I had always thought that Brother manufactured good products over the years from what I had seen and heard, so I finally decided to give them a try. But this turned out to be a big mistake...To begin with, what''s good about this machine is that the normal functions it was dsigned to do for you work fine. The machine prints, copies, scans, and faxes at an acceptable level. But the quality of the color when printing is not as good as compared with my $45.00 Epson C40UX printer that someone gave me as a gift.
The real problem with this machine lies in how fast it uses ink and the fact that it shuts down all functions whenever one of the four ink cartridges needs replacing.
I''ve had the machine for about 8 months now and at most I''ve printed maybe 100-150 pages with it. And all the pages have been 100% black ink only. Still, over this time I''ve had to replace the black ink and color ink cartridges two times since I purchased the machine. For some reason this machine goes through its color ink cartridges even when you''re printing only requires black ink. I basically use this machine for incoming faxes and occasional copies only, and during most weeks I don''t even print a single page with it.
In addition, when the machine indicates that you need to replace one of the ink cartridges, it stops all printing, copying, and fax functions until you replace that particular cartridge! So if people are faxing you something important, the fax will be quietly stored in the machine until you replace the ink cartridge. This is extremely disappointing that you aren''t given the option of printing out the fax if you''d like to before you replace the ink cartridge. Plus, you may be waiting for an important fax not even knowing that it''s already arrived because you see that no fax paper has been printed out from the machine.
Because of this and the fact that my Epson printer finally stopped working, a few days ago I upgraded to a HP Photosmart 2610 all-in-one, and so far it performs beautifully. But of course, the proof in how it really performs will come in the months ahead after I''ve had a chance to spend some more time with it.
But with respect to the Brother MFC-3820CN all-in-one, I really recommend that you look around and find a machine that doesn''t have the problems that I''ve just described to you. There are so many other machines on the market in the same price range that don''t have these same problems, and you''ll easily find a much more reliable machine that will also save you tons of money on replacing your ink cartridges.
Read Best Reviews of Brother MFC-3820CN Color Inkjet Multifunction Here
I never owned a printer that I came to hate so quickly as this. We have had this machine less than a year with fair results at best. Now I have the dreaded error 41 message. That''s how I got here...I find that means throw it away or hassle with the company and still own a bad machine. Don''t buy this!Want Brother MFC-3820CN Color Inkjet Multifunction Discount?
I bought the mfc3820cn because I wanted a multi-function to use on a network and this one has a network connection built in. It worked out of the box. Software install was painless and I was printing / scanning / faxing / copying in a few minutes over my network. There are 4 separate ink cartridges which seem relatively cheap..... another factor which influenced my purchase.The ink cartridges have no print heads. The heads are part of the machine. So the machine does periodic cleaning cycles. Thats OK, except that these cleaning cycles seem to start up at random, often in the middle of the night. It wakes the whole house up. Even turning the power button off, or disconnecting the network or USB cables doesn''t stop them. Theres apparently no way to stop them. I don''t know how, in designing a printer, that something like this could be missed. It doesn''t help that its quite a noisy printer anyway, much noisier than several Hewlett Packard printers I''ve owned.
The machine has a built in clock. A cleaning cycle could check the clock first and postpone the clean if its between certain hours. Brother tech support first suggested that I pull out the power plug at night. Not very practical for a fax machine.
If you intend having this machine at a business, then its probably fine, but if you intend having it in your home, then be warned, it will wake you up at night.
Save $0.04 off
I purchased the Brother MFC-3820CN (...), my first one after 6 months died, after getting an ERROR 41 on its screen, the second one, well works, but its a pain to find ink thats cheap and it won''t work well with Compatibles, so don''t buy them, second, when you print out a picture, the picture quality stinks, everytime I printed out a picture after the first time, the pictures always had horizontal lines through it, It just stinks, I can''t believe I purchased it. DON"T BUY IT... By an EPSON OR OTHER KIND..be sure that you''ve tested the Picture Print quality so that you don''t get Lines through your pictures like I do with this one. The only thing good about it is that, you can make copies...and thats about it.
HP PSC 2110 Multifunction
- Color printing, scanning, and copying in one compact product
- 600 x 1,200 dpi scanning resolution
- Up to 4,800-optimized dpi color printing on premium photo papers
- Accepts 4-by-6-inch photo paper for borderless prints
- Optional 6-color printing system
Buy HP PSC 2110 Multifunction Now
I was given the HP PSC 2110 multifunction printer after my sister repossessed my highly reliable and well liked Lexmark X-83 multifunction. The story is, my Lexmark was sitting idly for a few months when my sister got it in her head she really wanted a printer. And why go buy a printer when you can just "borrow" her brother''s. Well, my sister is a computer neophyte and when I saw that she managed to install the drivers and correctly hook up the printer turning it into a fixture with her computer system, I just did not have the heart to reclaim the printer.Well, then when my printing needs required a printer, I was given the HP PSC 2110 multifunction. The best way to proceed is to outline the topics.
Speed Excellent speed. The "fast draft" quality still looks better than previous generation dpi quality and "fast draft" is ridiculously fast. No complaints on speed.
Installation No problem on the install. It did put some goofy icons on the desktop and they aren''t all that useful.
Ink Cartridge I received a notification that my black ink cartridge was nearly out of ink. I then proceeded to print countless numbers of pages without noticing a dropoff in printout quality.
Noise EXTREMELY NOISY. One would figure that a printer should make noise when printing but this unit makes noise when it is idle performing repeated self checks seemingly at random.
Power The printer also does NOT have an automatic shut off or a power save mode. This is annoying.
Scanner My scans of black and white pictures came out light and extremely grainy. I used the competent but not spectacular bundled software to REDUCE the sharpness of the scanned pic by 200 percent. This eliminated the grainy aspect. Playing with the contrast will help with the light aspect. The other quirk I ran into here was that I had to have the bundled software running in order for the scanner to send the scanned image to the computer. If it wasn''t running, the printer only returned an error message.
Bundled software Not much to write home about.
Envelopes The paper tray can be manipulated to print envelopes up to 8 1/2 inches by width. It prints envelopes very well.
Copier function Works independent of the computer (i.e. the printer need not be connected to the printer for the copier to function).
All in all, I would recommend this printer but not entirely without reservations.
Read Best Reviews of HP PSC 2110 Multifunction Here
Bought this a few weeks ago to replace an HP DeskJet (still worked but slow). I have been very pleased with it so far. Installed it on an XP system without any problems. As with most USB devices, be sure to follow the directions when installing. We use it primarily as a printer and also make copies. Copy quality is good and you can easily select fast, normal or best quality and copy in black/white or color all from the devices control panel. Note that the 2110 does not have a sheet feeder. Also, remember to get a USB cable since one isn''t included in the box.If you''re doing a lot of scanning, I''d suggest getting separate products. I''ve experimented a little with the scanner but gave up and used my Epson Perfection 1640 Office (a great scanner) instead which is faster, has a legal size bed and has a sheet feeder. If you''re doing much OCR, you''ll want to get a program like TextBridge Pro (under $) or if you''re really serious, OmniPage Pro (around $).
I''ve been very impressed with the print quality particularly on photos. I also have an Epson C80 and this printer does a much better job when printing on premium glossy photo paper. I purchased an optional photo cartridge (replaces the black cartridge) and printed some photos in 6 color excellent quality the dark areas of the photos are more natural and skin tones are better.
Several reviews have said the printer is loud I would disagree. It does periodically "adjust" itself but it''s not noisy. Paper feed is reasonably quite (much quieter than my Epson C80). I would probably turn it off at night if it was in my bedroom though.
The reviewer who said you can''t put a used cartridge back in the printer is wrong. I did it today when using the photo cartridge without a problem. Perhaps he didn''t get the cartridges back in correctly.
Few suggestions for improvement:
Separate tanks for the color ink cartridges (it uses a single 3 color cartridge and a black cartridge which can be temporarily replaced with a 3 color photo cartridge). We have printed several hundred color and black/white pages and haven''t replaced a cartridge yet although, for the last 4 days, it has been warning that the color cartridge is low. More accurate ink indicators would be nice.
In typical HP fashion, it only holds about 50 sheets of paper.
In summary, for printing and copying, I would buy this again without hesitation.
Want HP PSC 2110 Multifunction Discount?
I bought this unit to replace both a UMAX 610S scanner and a Canon BJC-4300 printer, both of which were showing their age, but still worked well. I hate spending money on products that produce bad results, so I compared the HP against the comparable Epson and Lexmark products. I also compared against the newer Canon printers.To compare print quality, I got sample prints from each of the printers on normal paper and looked for the best one. HP came out on top on the surface. Of course, the print samples are optimized to make the printer look really good. Needless to say, most of my printing would not be optimized samples, but rather just plain text. So I took the print samples and concentrated on the text. The HP had higher contrast, sharper text than the others. OK, time for some magnification. Using a Bausch & Lomb 10x magnifying loupe, I saw that the dots comprising the HP text were in much better registration than with any of the other printers when printing at a usable print speed. Since the Epson, Lexmark, and Canon print samples were noticeably inferior to HPs, HP won the printing contest. When printing in the fast draft mode, the HP was still very clear and nice and fast.
For scanning, I found that it is nearly impossible to compare scan quality without hooking the scanner up to your computer. The only comparison of scanners that can be made at a typical computer store is one of size and perhaps how well it would contribute to the Ch''i of your workspace. Fortunately, scan quality was of secondary importance to me. If I wanted 2400 dpi, I wouldn''t be looking for a combo unit like this. My testing of the scanner was accomplished by putting my car keys and some loose change on the glass and hitting the copy button. One thing that was important regarding the scanning was the capability of scanning a three-dimensional object. My UMAX scanner has close to 2 inches of depth-of-field (an object almost 2 inches off the glass is still pretty sharp). Certain scanners (Canon 650U, for example) that use LEDs to scan have ZERO depth-of-field, meaning if the object is not on the glass, it is blurry. To make a long story stop, the HP has good depth-of-field, and make a quick copy of my car keys.
Thus end the accolades.
I have had a few problems with the PSC2110, some operational, some philosophical, but none related to the quality of the result.
First, as is mentioned elsewhere, follow the directions precisely when installing the unit, or you will have to uninstall and reinstall.
The biggest operational problem I am continuing to experience with the printer has to do with my Windows 98 installation. Periodically, the printer doesn''t respond to print jobs. The active job shows up in the print queue but cannot be deleted. The only way to print this job is to restart Windows and hope that it works. There is no way of predicting when this will happen. It is documented on HP''s support web site and they admit that they don''t know why it happens, but blames it on
insufficient system resources, like my 384MB of RAM, or other resource conflicts. I think I know why the problem happens, but you''ll have to keep reading.
Another operational problem I''ve had is with printing envelopes. Try as I may, I couldn''t get an envelope to print correctly. As a result, my Canon BJC-4300 is still being used for this purpose. I may get it to work in the future, but the point is that if it is trivial to print envelopes on my 5 year old Canon printer, it should me moreso on a new printer.
The first philosophical problem I have with the HP PSC2110 is the fact that what is essentially the driver weighs in at 160 MEGAbytes, which should be downright criminal for a printer/scanner. This is bigger than Windows 95 and has got to be in the running for most inefficient use of computing power by any software package currently out there, and there are some bad ones. Even when I''m not printing, I can detect the performance of my system being dragged down by this software. This is a
problem that didn''t exist before on my system.
Software that big (bloatware) is bound to have many more bugs in it than smaller software packages. HP''s decision to make a huge printer/scanner driver contributes to the Windows 98 (and WinMe) problem mentioned above, and is probably the reason they can''t find the problem yet. The product is too big. When all is said and done, they will probably find a memory leak of some sort somewhere or will abandon trying to fix the bug because there will be other ones that affect newer OSes.
Another thing I don''t like is the scanner interface. Once again, because it was written to be a "designer" UI rather than an efficient one, the response on my system to things like adjusting levels, resolution, scan area, etc., are as if I were communicating with the driver over a 56K modem. My UMAX driver, in comparison, was quick, powerful, and efficient. There are other design problems with the scanner interface. The workflow is very rigid. First you wait 5 seconds for the HP splash
screen to go away. Then you must do a preview scan, after which you may adjust the scan settings, then you can do your final scan, after which the scanner interface window DISAPPEARS WITHOUT SAVING YOUR SETTINGS. After looking at the final scan, if you want to change a setting, you have to start over with the splash screen again.
In short (short?), I am having a love-hate relationship with the PSC2110. The results are great, but I sometimes hate the way I have to get to them.
I really wanted the multifunction, so I took a chance. So far, so good. No problems, and I have Windows 98 SE. The installations directions are good, but amazingly I misintrepreted a screen message. BE CAREFUL: DO NOT PLUG IN THE POWER BEFORE YOU PLUG IN THE USB. I did that and had to uninstall the software and begin again. Once I REALLY followed the directions, I had NO problems.
HP Universal Instant-Dry Semi-Gloss Photo Paper (50 Inches x 100 Feet Roll) Save 19% off
- HP® Designjet Large Format Paper for Ink Jet Printers.
- To ensure the quality of your output from start to finish, rely on HP printing material for Designjet printers.
- HP''s specially coated papers are engineered to work with HP® Designjet print cartridges, ink systems, and HP® Designjet printers to deliver sharper print quality and colors that stay true and vivid.
- The result - a total printing solution designed to fit your needs.
Wonderful product.
Get yourself Amazon Prime. It is so worth it.
Save 19% off
Avery Business Cards, Microperforated (8471) Save 36% off
- Get outstanding quality without the wait. These heavyweight matte-coated Business Cards deliver vivid, high-resolution text and graphics that will impress colleagues and prospective clients. Free templates available online.
- 1,000 cards, 10 to a sheet, 2" x 3 1/2"
- Convenient do-it-yourself cards mean that you can make changes and print new cards at a moment''s notice.
- Heavyweight, high-quality card stock for a lasting professional appearance.
- For use with inkjet printers.
Sony 4 x 6-Inch Print Pack with Snap-Off Edges for DPP-F Printers (SVM-F120P)
- Print professional quality 4-by-6-inch digital photographs at home
- Designed to work with the DPP-FP50 digital photo printer
- 120 sheets of paper and print ribbon
- Features Super Coat 2 protective lamination
- Prints are water-damage and fingerprint resistant
Buy Sony 4 x 6-Inch Print Pack with Snap-Off Edges for DPP-F Printers (SVM-F120P) Now
I bougth this print pack assuming that it will work on my ex50. It''s out of stock last year and this was the one put on the site instead. I still had this opened package which I found out would not work on my printer. I wish amazon would make it clearer to buyers so that we can order the right print pack and dont get confused. I''m really dissatisfied with this purchase.JJBUltralast Sony 4" X 6" Print Pack with Snap-off Edges for DPP-FP50
The paper is a superior quality and very easy to use. The paper comes with the toner and the directions are very well written and easy to follow. Great product!
Want Sony 4 x 6-Inch Print Pack with Snap-Off Edges for DPP-F Printers (SVM-F120P) Discount?
When I ordered this item I didn''t know what to expect. I just got the Sony printer, it didn''t have paper, no stores here didn''t have and didn''t know where to get it.I went to Amazon and search and I found it I ordered not the top or bottem but in the middle. It came a I''m very pleased.Thanks,
JOHNNY H. SELLERS
Epson Stylus Photo R3000 Wireless Wide-Format Color Inkjet Printer (C11CA86201) Save $0.01 off
- Industry-leading pigment ink technology - Epson UltraChrome K3 with Vivid Magenta Ink Technology for stunning color and black-and-white prints
- Individual high-capacity ink cartridges - change cartridges less often with nine 25.9 ml individual ink cartridges
- Advanced Media Handling - offers consistent, reliable performance with front-in, front-out paper path;
- Unparalleled connectivity - Hi-Speed USB 2.0, wireless 802.11n and 100 Mbit Ethernet support
- Auto-switching Black inks - achieve the highest black density and superior contrast on glossy
I printed some color test charts at the Sam''s Club photo lab (which should be reasonable quality since they actually calibrate their printers at least once a day and when they change paper rolls) and on my R3000, then compared them to an actual X-Rite produced ColorChecker chart, and the output from the R3000 significantly beats the output from Sam''s Fuji Frontier minilab photo printer. The Fuji Frontier print is noticeably duller with generally darker colors and a narrower range of saturated color reproduction. You don''t have to be a color expert to see the difference.
For the R3000 the ink cost is about $1/ml which comes out to about $0.01 per square inch if you get it at a discount (search for "red river Cost of Inkjet Printing Epson R3000"). That makes a borderless 8x10 cost about $0.80 in ink, and a borderless 8.5x11" cost about $1 in ink. A sheet of Epson Ultra Premium Photo paper costs as little as $0.60 if you get it at a discount, so printing a borderless 8.5x11" ends up costing as little as $1.60 in supplies. (Not to mention that you can get third-party paper that''s just as good or better than Epson''s official paper for less money.)
The cheapest photo labs charge around $1.50 for an 8x10 (my local Sam''s Club currently charges $1.46). If we use a whole 8.5x11 sheet of official paper and a full 8x10 worth of ink to print an 8x10, we get $1.40 in supplies per 8x10 which is slightly cheaper than even Sam''s Club and significantly higher quality. Good third-party paper would be around $0.35/sheet meaning that you could also do as well as $1.15 per 8x10, maybe even better.
Admittedly though that doesn''t incorporate the cost of the printer, which you won''t have to incur if you just use a photo lab. If you bought the printer for say $800 and you''ve gotten your per-8x10 supply costs down to $1.15, then you''d need to print about 2,580 8x10''s before your total costs started to get lower than Sam''s Club''s $1.46.
When you get larger than 8x10 though then the printer really starts to pay off. One place online that isn''t too expensive and has a good reputation charges $6.30 for a 12x18 on glossy photo paper printed with a photographic lab process. It''s possible to get decent 13x19" gloss ink jet photo paper (same stuff that costs $0.35/sheet for the 8.5x11) for about $1.50/sheet. 12x18" of ink costs you $2.16 so total cost for a 12x18 on the R3000 with that paper is $3.66. At that price you need to print 300 or so of these large prints before your prints start costing less than $6.30, and again the ink jet prints will have better color quality than the photographic process printer. You also have the entire lifetime of the printer to make all these prints that we''re talking about. If you make on average about 10 8x10" prints every week then it would take about 5 years to make this cost back, but if you made two of the 12x18" prints per week then it would take about 2.8 years to brake even compared to the lower quality protographic process prints ordered online.
But none of these estimates take into account the value of the convenience and additional quality you get from having a modern photo inkjet printer right in front of you. Add in costs like transportation to pick up photos, time spent driving, any sort of cost of inconvenience by having to wait for prints to arrive in the mail, the additional value of better color quality, and other hard to quantify things then the real savings may be better. Depending on how much these costs add to the cost of photo lab prints, a decent ink jet printer like this might pay for itself much more quickly.
Still, you have to keep in mind that owning your own printer like this only makes sense if you''re going to be doing a certain volume of printing. If you only ever print maybe 10 8x10s a month then the printer will never be worth it solely from a cost-per-print savings perspective. Also, if all you ever print is 4x6 then even just your ink cost without paper is going to be around 2.5x the cost of getting 4x6 prints made ata cheap online lab or drug store. So for small prints like 4x6 the printer will absolutely never pay for itself from the supply perspective, and probably not even from the convenience perspective.
The only problems I''ve heard of with this printer seem to involve priming the print head (pumping ink into the initially empty hoses that run from the ink cartridges to the print head, basically) and the printer going through unnecessary cleaning cycles, but Epson support is great about addressing these. My R3000 went though an unnecessary priming cycle when I first set it up, wasting about half the ink in the cartridges. Support got back to me in less than a day and offered to send me a full set of full replacement cartridges. I haven''t seen anyone complaining of clogged nozzles or any of the usual inkjet problems.
The color gamut of the R3000 when used with the Ultra Premium Photo paper significantly exceeds the AdobeRGB colorspace in areas of dark blues and greens. This allows you to make the most of your camera''s sensor capabilities IF you convert your RAW files into a format using the ProPhoto RGB color space (the most common one that actually holds those colors) AND print to the printer using proper color management with the appropriate ICC profile. Photo labs almost always require all files to be encoded as sRGB (which is smaller than both AdobeRGB and ProPhoto RGB), and printers like the Fuji Frontier have smaller gamuts than sRGB anyway, so they can''t possibly achieve the wide range of colors that a high quality professional inkjet can when it''s wielded by someone with sufficient color management skill.
Anyway, excellent printer, reasonable cost of ownership and operation, higher quality printing than you get at a photo lab, convenience, and excellent support from Epson. When you consider this part of your "digital darkroom" and compare its cost to the cost of materials and equipment you''d spend for an "old fashioned" film darkroom, the cost is quite reasonable.
Buy Epson Stylus Photo R3000 Wireless Wide-Format Color Inkjet Printer (C11CA86201) Now
I''ve been a long-time user of the Epson R2880, but after several years of very heavy use, it was getting to be time to replace the print head. Since this is an expensive repair on my trusty old R2880, I decided it might be more cost efficient to go with an entirely new printer, and this led me to look at the R3000.While I was replacing my printer, I figured I''d also take a look at the competing HP and Canon products. Side by side against the HP and Canon products, I found the Epson to be a shade better, especially with black-and-white prints. It''s not a dramatic difference, and maybe because I''m so used to the older R2880, I''m just biased towards Epson. Still, for me, it was enough to confirm my decision to go with the Epson R3000.
Compared to my R2880, it''s hard to see any obvious differences on the R3000 in terms of print quality. B&W mode seems very slightly better on the R3000, and at magnification, small details seem slightly sharper. Otherwise, colors and so-called "bronzing" are about the same to my eye. Not that this is a bad thing, since the R2880 is a very fine printer in its own right. The R3000 uses essentially the same ink technology as the R2880, so I suppose not seeing a dramatic difference is to be expected.
While I''m comparing to the R2880, physically, the R3000 is about an inch deeper, weighs slightly more and has more of a squarish look. Still, even though there are marginal print quality improvements at best, there are several features I found worthwhile compared to the earlier generation. Some little touches the removable power cord, for example, are helpful. The larger ink capacity is a significant boost to me...I''m getting many times more prints per ink change, and that''s a good thing. I like the integrated LCD display, ink level monitors and control menus. Lets me put the printer far away from my computers and still be able to control it when I need to. And no more manual matte black/photo black switching is also a terrific feature, at long last.
Then there''s the built-in networking capability, something I''ve been wanting for a long time. I was able to position the printer in another room, turn on the WiFi support (right from the printer), and now I can print anywhere without buying any sort of add-on network server. Getting up and running was really simple. I print from both Macs and Windows PCs, and once I had the wireless configured, I was able to install the drivers on multiple computers with no trouble. Whole thing from opening the box to printing the first page was under 15 minutes, and most of that time was installing the ink cartridges.
Speaking of drivers, they seemed to work flawlessly on Mac OS X 10.6, Windows 7 and Windows Vista. I''ve printed with iPhoto, Aperture, PhotoShop 5 and Nikon''s Capture NX2 with no problems whatsoever. I''ve used the print profiles for all the papers I like to use, and am getting the results I expect. All in all, no surprises and amazing prints.
I''d like to say that the construction quality is of a grade where the printer will last a long time, and for the most part, it is. If you print a medium number of prints, I''m sure this printer will last forever. Still, if you''re like me and you print hundreds of prints every week, then I suppose the consumable parts of the printer will wear out long before the rest of it does, as was the case with my R2880. To me, this isn''t necessarily a bad thing...I just assume I''m going to spend a few cents per page on printer hardware, and then I get to have the latest and greatest when they come along. At least until I find space for more of an industrial printer, like the Epson 7900 or something in that family.
Definitely recommended as the best 13x19 printer currently on the market.I am a serious amateur photographer. Recently my Epson R1800 printer died. Based on my experience with two previous Epson printers and my research, I decided to purchase the R3000. I have had the printer for a couple months now and I am quite happy with my purchase. A quick summary of my observations are as follows: 1) it was very easy to set up; 2) the print speed is so much faster than my R1800 even at the quality setting; 3) having choices for quality settings is great, but I notice little difference between the speed, quality and maximum quality settings; 4) the automatic changing of the black inks works quite well; 5)I have printed up to 11 x 14 size prints and they are excellent; 6) the larger ink cartridges are much more convenient to use; and 7) the on screen menus and the user manual are prepared in an intuitive fashion. The bottom line is you can''t go wrong with this printer.
Want Epson Stylus Photo R3000 Wireless Wide-Format Color Inkjet Printer (C11CA86201) Discount?
I am an advanced amateur photographer, been shooting most of my life. Due to budgetary constrictions, translation my sweet wife, I have been making a gradual move towards perfect color for the past 3-4 years. Perfection being unattainable of course, things you MUST have to get close to perfection include:1) A good camera, tons of good stuff on the market from Nikon and Canon. I use a Nikon D300. Shoot RAW files btw, take my word for it, Google it, end of the day its like having a time machine for things like white balance, exposure compensation, saturation levels, black levels, fill light, recovery, vibrance and on and on and on. With lossy jpg files...good luck. You can always export jpgs from your RAW files, so shoot RAW.
2) A good monitor (doesn''t have to be a $2,500 $5,000 Eizo save your money for things that will get you closer to perfection with more bang for your buck). I''m using a 27" HD Viewsonic VX2739wm that is calibrated which leads me to #3.
3) A way to calibrate your monitor and printer (with Epson pro papers, the ICC profiles they provide via download work exceptionally well, but you still MUST calibrate your monitor) take my word for it; get the Color Munki Photo (under $500 now) and it works amazingly well. Better than devices costing 5 7 times more just a few short years ago.
4) Good photo editing software; I use Lightroom 3.3 and Photoshop CS5 but I have to tell you I spend 95% of my time in Lightroom so most bang for your buck is there. I use PS for retouching or being creative primarily, I never print from Photoshop. I always print from Lightroom, it has the best printing interface of anything on the market. If you are thinking yeah but I can''t softproof in lightroom, that leads me to #5.
5) Softproofing plugin for Lightroom: This is a very important piece of the puzzle, if you don''t learn how to softproof, you will never get close to perfect color and contrast in your prints. Visit the Luminous Landscape web site and download ($44) their "From Camera to Print" video series. They are updating it from the version I have that was shot in 2007, worth every penny. I learned more about color calibration and getting great prints watching this series than everything else I have seen and read combined.
6) Professional paper, sorry you''re not getting close with that off-the-shelf coated crap from Staples or Walmart and you need a good printer to handle professional papers which leads to #7.
7) A good printer. The Epson R3000 fills the bill at a great price point. It uses the same print head, firmware and inks of printers costing thousands of dollars. If your print volume is low and 13" wide (panorama''s up to 13 x 44) suits your need don''t even think about the 3880. It doesn''t handle roll paper (think canvas on hardboard or gallery wraps up to 11 x how long you want) or thicker fine art papers at all. The R3000 handles many more professional papers than the 3880 from Epson and from other manufacturers including Hahnemühle with ICC profiles for the R3000. Forget the Epson 4900 with 200 ml ink cartridges if your volume is low. Those cartridges will run you a thousand bucks or more to replace and if you don''t use them in a timely manner because you are terrified of the cost they could expire and do a wonderful job of clogging the print head. With a low volume you simply don''t need it.
I have nothing but praise for this printer. It is phenomenal. The roll feeder and WiFi are two great features. Check out RC Concepcion''s (Photoshop User Magazine) review of this printer on YouTube.
I have finally attained the contrast, color and black and white print quality I have been waiting for. Epson has bridged the gap for amateurs who want pro results with their prints with this printer.
Save $0.01 off
I decided on this printer after hours and hours of comparison research andI have had no regrets since purchasing my unit from a most obliging retailer
via Amazon.
The first serious (and frightening) test of the R3000''s capabilities was for
an exhibition I had been invited to put together of images from a recent project.
I printed off 35 black and white photographs on Chromajet Metallic Pearl A3+ using
the printer''s own ''Advanced B/W'' settings and the results were simply awesome!
The exhibition was a great success and I have since sold over 20 framed prints.
What excited me most was that the R3000 reproduced the images almost exactly as I
had intended, pushing it to the test with some quite unusual processing techniques.
A true testament to the R3000''s print quality and my love affair has only just begun!
Sharp EL-2630PIII Deluxe Heavy Duty Color Printing Calculator with Clock and Calendar Save 50% off
- Extra-large 12-digit display with punctuation
- Quiet ribbon printing in black and red
- 4-key memory, grand total, average, mark-up functions
- Calendar/clock function displays and prints date and time
- Uses standard paper roll
Buy Sharp EL-2630PIII Deluxe Heavy Duty Color Printing Calculator with Clock and Calendar Now
This is a replacement for the previous model. Like it''s predecessor, it''s an excellent printing calculator.My only wish is that the times (X) key were located to the left of the number pad. Other than that, it''s just about perfect.Probably one of the better machines for this price range. Fast, (it keeps up with me), and the keys have a nice feel. The date thing is questionable, but it''s ok. I think it''s better than most other machines advertised. I was a corparate auditor, and I can fly on this thing. The keys are precise, and does what your finger imply.
Want Sharp EL-2630PIII Deluxe Heavy Duty Color Printing Calculator with Clock and Calendar Discount?
I''ve had a number of desktop calculators over the years, but this particular model has everything one needs for general office calculations plus is very easy to use and easy on the eyes. First class machine and probably the best one yet.Save 50% off
As an accountant business user we beat these up and this model from the first EL-2630 to the EL-2630PIII has never let me down or needed repairOnly the good calculators have the = and + on the same key. Skip anything else. BIG dsiplay thats easy to read.
Updated: 3 1/2 years later and its still working perfectly.
HP Office Recycled White 8 1/2 x 11 Inch Paper 5000 Sheets (11210-0) Save 28% off
- 20-lb. recycled white office paper with a 92 GE brightness rating.
- Enjoy HP''s world-famous reliability at a great value.
- Helps reduce dust build-up that can cause paper jams and wear and tear on copiers, printers and fax machines.
- Use it and you could spend less time clearing paper jams and less money on service calls.
- Acid-free, so documents last a long time.
Save 28% off
Epson : Impact Ribbon FX80/MX80/LX300/LX800 /FX880/FX880 -:- Sold as 2 Packs of - 1 - / - Total of 2 Each Save 20% off
- Finest quality for clear sharp images
- All new product for longest lasting trouble-free operation.
- Sealed in plastic & packed 6 ribbons per box.
- Same day shipment from Paper Shipped Today
Dell B1260dn Mono Laser Printer Save 45% off
- DELL SINGLE FUNCTION MONO CHROME LASER PRINTER w/2-SIDED PRINTING/NETWORKING/MOBILE DEVICE SUPPORT
- USB 2.0 INTERFACE CONNECTION | ETHERNET 10/100 CONNECTION
- 150-SHEET STANDARD PAPER TRAY | 1200x1200 DPI MAX RESOLUTION | 600x600 DPI DEFAULT
- 533 MHz PROCESSOR | 64MB RAM | UP TO 29 ppm LETTER
- SHIPS w/TONER & POWER CORD
I had some understanding how to set up a printer to a PC but not to a PC and a router needed for our iPad 2. I had no problem doing either one of them by following the instructions. My wife''s iPad 2 found the printer before I knew it and printing from it is as easy as it is from a PC (no sending the file to an email address bla bla bla) just hit print, ensure the printer intended to print from, enter.
I had no clue how the duplex feature could work other than to use both sides of the page but this Dell has an Eco feature that I think is worth sharing. I test printed a three page text document using this feature. The Dell printed the text automatically using "landscape" style printing two pages on one side of the paper and the third page on the back side. I realize this feature might not be useful by some businesses but it works for me. The feature is easy to turn off and on!
The printer itself seems to be well built. It is not made of cheap plastic as far as I can tell.
I did not print much stuff as of yet so I cannot state how well it will hold up under even light use.
The last time I checked, buying toner through Dell should make printing costs 3.7 cents per page.
I bought my printer through Dell and paid more than it is selling for on Amazon.
Update...Three days after installing the printer we realized a Guest User could not print. I had no clue what I did wrong so I called Dell Technical Support. DTS told me they will help me fix my PC related software issue for a one time fee of $139 since my Dell PC software warranty expired 14 months ago. I told them it was a printer issue not the PC yada yada but they refused to help me unless I paid the money even after I told them I will box the printer and ship it back to them...I called a second number, got a different person, who told me I got the wrong printer department, put me on hold for a half hour and I hung up. You all know what I think about Dell Technical Support right about now?The manual is a joke, just can''t get the wireless set up so living on USB connection for now. Forget about AirPrint.
Panasonic KX-MB1500 Monochrome Printer with Scanner and Copier Save 9% off
- 19ppm
- Flatbed Scanner
- USB
After moving in to her new college apartment, I only received one call from her about the printer. It, like most printers, doesn''t come with a printer cable. I figured she''d use the one she already had, but that was no where to be found. So I told her to go to BestBuy and purchase a USB printer cable. (I would have sent her one from Amazon, but even an overnight delay would lose her concentration.) The shocking thing was the clerk at BestBuy wasn''t sure what to sell her. What?
In any case, she is very happy with her new printer and I am very happy not to be troubleshooting her printer setup over the phone.
Buy Panasonic KX-MB1500 Monochrome Printer with Scanner and Copier Now
Me gusta el producto y es economico, lo recomiendo pues es facil de usar y mantener. un poco limitado en el tamano de las hojas.Read Best Reviews of Panasonic KX-MB1500 Monochrome Printer with Scanner and Copier Here
This product was a very good deal until you started to use it. The drivers were amazingly hard to set up. I had to take it to computer shop and get them to do it for me. Even they had problem with it. It also did not have USB port with it. Nor a full ink cartridge. The price was good was I think it was too much for the quality of the printer and the degree of trouble I had setting it up. Sorry, Amazon. This was just not a good deal. I''ve never written a bad review for anything from you but this is a first for me.
Canon PIXMA iP6000D Photo Printer
- Up to 4,800 x 1,200 dpi color, droplets as small as 2 picoliters
- Built-in 2.5-inch LCD to view, edit, and print, even from digital cameras
- Direct printing from memory cards and PictBridge-compatible cameras
- Automatic 2-sided printing; 6 individual ink tanks
- USB interface, Direct Print Port, IrDA port; PC/Mac compatible
Buy Canon PIXMA iP6000D Photo Printer Now
After weeks of reading reviews about photo printers, I purchased the Canon ip6000D based on it''s high ratings. So far it has been a great printer.Pro''s
easy set up
4x6 photos done in around 30 seconds
great picture quality(i couldn''t tell the difference when compared with digital photo''s from my drugstore)
Don''t need a computer to get pictures from your camera
6 seperate toner cartridges
Transfer of files very quick
Quiet printing
Con''s
LCD screen is hard to read if not at the right angle (minor annoyance, but doesn''t affect quaility)
Doesn''t come with a usb cable
best pictues with canon glossy paper other paper manufactures
don''t provide as good quality
I highly recommend this printer.
** update 1/28 LCD screen can be fixed by switching the contrast on the printer,which of course was written in the manual!!
Read Best Reviews of Canon PIXMA iP6000D Photo Printer Here
I LOVE Canon printers and feel that they are the best ink jet printers made for many, many reasons. I have owned all brands, and, truthfully, Canons slipped badly for several years, but in the past year they have zoomed again into the lead. The ip6000D is no exception to the quality build and quality results that Canon printers produce. The problem is that I was needing a CD/DVD printer and all the web info, as well as Canon''s own publicity for this printer, their pdf file on this printer, and many sites selling this printer all indicate that it does print CDs/DVDs. Thus, I ordered it from Amazon, my favorite web purchase store. When it arrived, I noticed it had no CD tray and there was nothing in the book about printing CDs or DVDs. I called Canon and they said they were not aware of the printer and would do some research. About 5 minutes later the guy came back and said that the printer WITH THE EXACT SAME NAME had CD printing support in ALL countries except the U.S. I told him that having the same name and number system was absurd with different features. He blew me off. So beware, if you want to print CDs or DVDs, this is NOT the printer to get. But for everything else it is the best choice for home or office and especially for photo printing. With Canon printers, you get amazing quality, cheap refills, no clogging, no chips in the refills, and no paper jams. Without the problem I have cited and all my hours on this issue, it would get 5-stars from me as all recent Canons have. The Epsons and HPs are in a second level and the Lexmarks are at the bottom. I have to go with the Epson Stylus R200 for my CD printing, despite the fact that I did not want to go back to Epson. Amazon, as ususal, accepted my return without hesitation and remain THE kick ass company to do business with.Want Canon PIXMA iP6000D Photo Printer Discount?
I have had the printer for over six months now. We use it at work and print a large number of 4 X 6 photos. We are delighted with the photos and with the text printing we have done. And I''m very fond of the dual paper paths, since we can keep the photo paper in the bottom tray with the letter paper in the upper slot. The multiple ink tanks are very economical, reasonably priced and despite being small they go a long way. Sometimes it is hard to see the lcd screen in the area we have the printer, but besides that it is really great to be able to print a fast photo without booting up the computer.I do have just a few observations about the printer, the paper and the ink.
As I indicated above, the backlighting of the lcd isn''t the best, and sometimes it is very hard to see what you are printing. Even changing the angle of the screen doesn''t always help. I''m going to be readjusting the task lighting in the area soon. If you are limited in the placement of the printer you may need to do the same.
The printer will start nagging you to change ink cartridges long before you actually need to do it. I think of the first message as really a reminder to buy a new cartridge when you go out. Unless you are printing a photo that is almost all one color or a page that has been almost entirely blacked out, you should have more than enough ink to print a minimum of half a dozen 6 X 4s or a ten page letter.
I don''t know which HP paper another user was using but the photo paper we tried wouldn''t take the ink at all. The resulting prints where interesting, they ended looking like a matte multicolor paint crackle effect over a black background when they finally dried, But no one would have been able to tell you what the original image was. I would be very careful about the HPphoto paper. Sure try it if you already have it or are given it, but If I was buying it, I''d get the smallest pack possible until you know for sure it will work.
All in all, this is one fine printer, for both text and photos.
Pantone Plus Series GPG003 ESSENTIALS ADVANCE, Eight-Guide Set
- 1,341 PLUS SERIES Solid Color choices
- 2,058 Goe solid colors
- Goe color selection and palette building tools
- sRGB and HTML values provided for solid colors
- 2,868 CMYK color choices, with screen tint percentages
The names of the different guides has changed over the years so now they call the "Spot to Process" guides "Color Bridge." If you''re using an older application it might not be intuitive. The CMYK books with this set have the new naming convention and numbering sequence as one of the other reviewers stated, so the older DS color codes will not match them.
You''ll want to make sure the print shop you''re going to use has these guides on hand. There are a lot of new colors in the solid guides that are not included in the original solid color sets.("Plus") Your printer will need access to be able to get the ink mixtures for the new inks and for optical site matching and color density.
If you''re new to designing, you''ll need to make sure you indicate which matching system you''re referring to, whether it be Solid, CMYK, Pantone Process, or Goe color. All have different coding sequences. If you''re looking at the price tag on these, the Goe colors are newer so a lot of shops might not be using them yet... they are cool though. The other CMYK swatch books really won''t matter so much if you''re familiar with mixing CMYK colors. You might want to look into getting the Color Bridge set by itself and save a little scratch since it will show the solid spot color with the process conversion next to it if you don''t need every color in the rainbow to match.
If you use the Adobe Creative Suite line of products, you''ll need to visit Pantone''s site to download the Goe Color Palettes as well as the Pantone Plus Palettes since neither were included in CS5 at the time of this review. I would post a link, but I''m sure it would be removed. Once they''re installed they will show up under the swatches menu.
Buy Pantone Plus Series GPG003 ESSENTIALS ADVANCE, Eight-Guide Set Now
The new guides look good and will come in handy. It''s good to see the swatches on coated and uncoated stock. The addition of Bridge on uncoated stock is a necessary tool, as inks change appearance between coated and uncoated stock. The New GEO guides has a good color range, check with your ink vendor or local print shop for availability before specifying a color for print. You need to know it''s going to be available.The digital version of the color libraries have not been added to the design software (at this time (Sept 2010)), to spec one of the GEO colors, a similar spot color would be chosen, and clear instructions need to be provided in order to make sure the wrong color is not used.
The CMYK libraries are completely new color formulas. They do not match the previous set of CMYK swatches and DO NOT invalidate the previously booked color swatches, it expands the range. So hold on to that older set of process swatches, they will come in handy.
The solid set that was included on matte paper was left out. For the most part, I have no complaints here. In reality, matte paper is not used often in the print shop I work in. It''s more expensive, subject to availability, and the ink can take longer to dry. My reason for wanting to hold on to the matte samples, is to have a printed sample to show to the customer. Most of the time when someone tells me they want a matte paper, they mean an uncoated stock. Matte paper has a dull coating, with the dull coating, comes a light shine (not high glossy shine). A true 100# matte stock feels thinner, compared to a 100# uncoated stock. So why are people getting matte and uncoated paper confused?
Features: The process swatches have CMYK color bars above the formulas, making it easier to define the color break down for the color. Three features were taken out the solid libraries. The four dots that suggest a color converts to CMYK fairly well. So that a company that has a specific PMS solid color can spec out a CMYK formula and get close to the same color. The three circles that suggest a color converts to RGB faily well, for the same reason, getting the company colors to close to the print collateral on the internet. The last feature to be taken out was the parts list. Parts have been replaced strictly by percentages. Parts, percentages, same thing, when it comes right down to it. Some people who mix ink see parts better than percentages when mixing small quantities. PMS 187: 12 parts warm red, 4 parts rub. red and 1 part black (percentages 70.6, 23.5 and 5.9) If mixing a pound, or half a pound, each part could be an ounce or half ounce. The total mix would be an ounce over a pound or half ounce over half a pound. Removing the parts breakdown, removes the parts to ounces comparison reference. Print shops are going to be holding on to the books that give a parts breakdown. You can''t just generate a list that says 5.9% is one ounce, PMS 1767 is 1 part 032 red and 15 parts transparent white, the percentage break down on the red is 6.2%.
The color swatches are a designer''s friend, don''t design without them. I think the digital versions of the color books should have been updated the same time the printed samples were released. Because there are going to be designer and print shops holding on to the older sets, I think this should have been marketed as a companion to the previous versions of the Pantone Essentials sets.
Read Best Reviews of Pantone Plus Series GPG003 ESSENTIALS ADVANCE, Eight-Guide Set Here
The paper stock is SO FLIMSY compared to previous years. Big disappointment. Totally not worth the price. I''m afraid to even look for a color myself, never mind handing it over to a client. This will get torn and ruined so fast.Want Pantone Plus Series GPG003 ESSENTIALS ADVANCE, Eight-Guide Set Discount?
Always great to get new "toys" for my design work ... and figured it was about time to get a new set of pantone books!Pleased as punch!
HP 38 Light Gray Pigment Ink Cartridge in Retail Packaging Save 24% off
- Print brilliant, true-to-life photos and fine-art prints with HP''s new pigment-based Vivera inks
- Get precision color consistency and vivid, true-to-life hues
- Produce affordable studio-quality photos
- Cherish long-lasting color photos that resist fading for more than 200 years
- Replace only the cartridges that runs out among eight individual colors
On the other hand, these cartridges are around 30 bucks a piece and I need 8, so it rather irks me that the cartridges are so small. Perhaps that''s a comment more appropriate for a review of the printer design, but it''s worth noting here.
Also worth noting is that you SHOULD NOT immediately replace the ink cartridge in your HP B9180 when you get a message from it saying that this or that cartridge is about to run out. I say this because, when mine said that, I checked the little meter that tells you how much is left and it said 40% of the cartridge still had ink in it. 40%! To me, 40% is not "about to run out," but I did go ahead and buy an ink cartridge -I just held onto it until it really became obvious that it was no longer printing that color. Only then did I replace the cartridge, because doing otherwise is needlessly wasting money.
I''m not quite cynical enough to say that HP WANTS you to replace (and recycle) the ink cartridges prematurely, but it obviously would make them more money if you do. Just keep your eyes open and you''ll be fine.
Buy HP 38 Light Gray Pigment Ink Cartridge in Retail Packaging Now
Light Grey is the most used ink in my HP B9180. This cartridge has 27ml of ink selling for 27 dollars which is not bad. Canon''s inks are around that price range as well but come in smaller 13ml tanks. Also do check the expiration date of the ink as the chip on the cartridge will yield a warning if the expiration date has been reached. So far expired inks has yield the same result as new inks with no fading for the past year.If you are cheap like me, buy empty tanks online and refill them with HP''s 70 ink used for the Z2100 printers which comes to be $75/130ml. The HP no.70 tanks use the same inks but in a bigger tank.
Search for printer filling station
Read Best Reviews of HP 38 Light Gray Pigment Ink Cartridge in Retail Packaging Here
The product itself is fine but the cartridge I received was a month and a half away from expiration and the price should have been drastically reduced to reflect that.Want HP 38 Light Gray Pigment Ink Cartridge in Retail Packaging Discount?
Can''t beat HP for ink quality. These cartridges are large and more cost effective then most. All of the 38 series are great.Save 24% off
I use this PhotoSmartPro B8850 printer for fine art reproduction. HP engineers in San Diego did a great job on it. I hope HP keeps supporting it! Papers are becoming scarce. Amazon delivered on time. Product was well within expiration date. Don''t buy this ink from any seller unless they can tell you it is within expiration date, otherwise your printer will make you shut down and use ink in between each print.
Sony Picture Station DPP-FP70 4x6 Photo Printer
- 2.5" TFT LCD Screen (fixed)
- One-button print process
- Simple set-up for operation virtually anywhere
- Preview and edit photos before printing with built-in displays and enhanced editing features
- Dye-sublimation technology that ensures a continuous color tone for each print
Buy Sony Picture Station DPP-FP70 4x6 Photo Printer Now
This is an excellent product that produces pictures with a sharp image and fine quality prints. Handy,compact and convinient to carry anywhere.Read Best Reviews of Sony Picture Station DPP-FP70 4x6 Photo Printer Here
Bought this for business use. We use it for photos that eventually go to court as evidence. This printer is faster and prints better than our more expensive professional inkjet.Want Sony Picture Station DPP-FP70 4x6 Photo Printer Discount?
The picture quality is simply amazing. Just like the ones sent to the lab. Easy to use.
LD Premium Glossy Inkjet Photo Paper (4""X6"") 100 pack - Resin Coated Save 43% off
- one year guarantee
I complained to the seller on November 1st but LD Products said they would not provide a refund because they provided the paper for free. However, the paper was not free because it was included in the total price for a package of ink cartridges and paper for the Epson Picturemate. The seller provided only the ink cartridges at first, and provided the paper later only after I complained that it was not provided. The seller did not respond to my initial complaint, and provided the paper only after I complained to Amazon.
Buy LD Premium Glossy Inkjet Photo Paper (4""X6"") 100 pack - Resin Coated Now
I had ordered the LD-T5846 Cartridge to try it out and ordered this LD Products photo paper 4X6 to try it out just to save some money on print cost. I got a little mad with the company that I ordered from (4inkjets)as I had ordered 2 packs of 100 ea but received 10 packs of 20 each instead. I contacted them and it was resolved.Otherwise, I finished using up my Epson T-5846 pack and realized I still had some ink left in my cartridge. So I stuck in this paper in and to my surprise it worked. I found the Epson ink cartridge will print great on this paper at alot less per print. I now have a great backup and it cost less. I also tried my Epson PictureMate 260 using the LD Cartridges that is comapatible with the unit with this paper and I also got good quality.
I decided to try this LD products paper and their cartridge to save money per print and I am satisfied. As any compatible product, you will receive some bad stuff in general. I contacted the seller and they will replace the bad products as they occurr. I am satified and do recommend this paper for the PictureMate PM 260 as a good backup and for printing general photos you might want to print in bulk.
Read Best Reviews of LD Premium Glossy Inkjet Photo Paper (4""X6"") 100 pack - Resin Coated Here
It would be nice if the ink actually came out of the cartridge or if the Yellow did not always run out after 10 pictures.