- Color laser printer produces up to 21 ppm for efficient office use
- Time-saving one-touch automatic duplexing feature
- Includes a 250-sheet cassette and a 100-sheet multi-purpose tray
- Durable monthly cycle of 65,000 pages
- Measures 25.6-by-25.4-by-36.2-inches
*SETUP*
The 100-lb shipping box (approximately 2'' x 2'' x 3'' high) showed up outside my house a few days ago and required two of us to man-handle down to the office where it was to be set up (Samsung helpfully provides perforated handles to help with this). The instructions for (properly) taking the box apart are on top of the box and make break-down a snap. Once the box is disassembled, the printer is much easier to move to where you want to locate it.
After removing the bits of tape that hold the unit together, the toners were fairly easy to install. One thing I instantly noticed about these, compared to the last few Samsungs I''ve used (ML-1440, and CLP-500) is that each of the toner cartridges comes with its own drum (which you shouldn''t touch or keep exposed to light)! One less consumable to replace in the long run (and probably how it can achieve such high--and constant--print rates, each cartridge transfers its toner to the belt simultaneously instead of having to do multiple passes for each color).
You can connect the MFP directly to a computer using a USB cable, or to a network via 10/100 ethernet. I chose the latter, as I wanted to be able to easily share it--I think the only difference is that you can''t use the scanner as a TWAIN device (but this is made up for, as I''ll outline later). You can assign the printer a static IP from the front panel, or use DHCP (default) to pull a network-assigned address (which was statically assigned using my WRT-54GL router).
The software took a few minutes to install from the included CD (post-script driver, regular driver, scanner, etc.), and it was able to automatically detect it on the network--not sure if it''ll do this when you''re printing, so you''re probably better off giving it a static IP, however which way you go about doing it. As we''ve come to expect these days, there was a nice web-accessible interface (http://ip-of-printer) that gives status (and state of consumables), counter, security options, etc.
*PRINTING*
Works wonderfully! I printed off 450 legal-sized colored (mostly text) pages in around 25 minutes. Good (IMO) color reproduction, and crisp, readable text. If you''re used to certain other printers (at least, Dells and Lexmarks in my experience) there isn''t the same waxy, almost glossy feel in the output, but rather, a more matte texture (something it shares with the CLP-500). It does take a minute or so for the fuser to warm up from a cold start, and presumably, from sleep mode as well (length of time until it enters sleep mode is adjustable).
Of course, I printed off the requisite high-res color "test picture" (a Spiderman 3 wall paper I had), and it came through with good (IMO) color reproduction, and little banding (I had to really stare at it for a while to notice a bit of banding in one corner--this disappeared after an inch or so). I would scrutinize this more, but as I don''t do a great deal of image work, it''s hard to justify churning out more pictures.
How did the toner survive? Well, it comes shipped with the "standard" toners which yield 2500 (black) or 2000 pages (cyan, magenta, yellow), according to ISO/IEC 19798 standards. You can also get high-yield toners which yield 5500 (black) or 5000 letter-sized pages (CMY), again, according to ISO/IEC 19798. What exactly is ISO/IEC 19798? I have no idea, and to find out, you need to shell out a few grand to the ISO (International Organization for Standardization). Though, to be fair, more and more printers seem to rate according to this same standard, and (knowing standards documents put out by engineers) it''d probably come in several binders. But even a synopsis would be nice.
Anyways, after 450 (legal-sized) pages of mostly green text, I had run the yellow down to 40%, the blue to 60%, and the rest had barely been touched.
*COPYING*
I copied the image I had printed off, and reproduction was good, with a little graininess (the copying resolution, as far as I know, is fixed at 600 x 600). You can select which type of original (image, text, etc.) you have, but I haven''t played around with this very much. Text reproduction works quite well. According to the manual, it does everything a nice little office photocopier should be able to do: edge-erase, collation, zoom, etc., but I haven''t really tested this feature.
*SCANNING*
According to the manual, the scanner is capable of up to 36-bit 600x1200 dpi (optical) or 4800x4800 dpi (enhanced) resolution when used in TWAIN mode, and somewhere between 100 and 600 dpi (adjustable) when used in scan-to-USB/PC/e-mail modes. After installing the SmartThru software, I was able to scan in a document, and have it show up in the ''My Pictures'' folder on my networked computer (there''s a dialogue on the 2-line LCD that you''re lead through when you press the ''Scan'' button, setting mode, resolution, destination, etc.) While PDF and JPG output worked fine, it seemed to have some troubles with TIF output (i.e. all that resulted was an impossibly small file).
*CONCLUSION*
For me, it came down to this unit or the very similar Brother MFC 9840cdw. Both even have the same delighter: nifty, stand-alone USB-key operation (scan to, and print-from PDF or various image formats)--something I haven''t used. While both have a very similar speed, features, and toner cost-per-page (I took this and the Brother--which uses a 5% page-coverage toner yield--at face value), the Brother will require drum and waste-toner bottle replacements, something not needed for the Samsung (both require transfer belt replacements at 50,000 sheets).
These, along with my previous good experiences with Samsung printers (and really noticeable banding in the admittedly-single output of Brother output I got my hands on) was what made the choice for me. While the Samsung is more expensive (~$75), this works out to be fairly negligible in the long run. At the cost I think this is an excellent SOHO or small workgroup all-in-one, which handles standard office fare very well.
Buy Samsung CLX-6200FX Color Laser Multifunction Printer Now
I don''t think I''ve ever written a review before on Amazon. At least not that I can remember. But I wanted to write about this printer. Geesh. How hard is it to make a good printer now a days? It would appear like it''s nearly impossible if you have been through the agony of the HP experience. I could write a small book on the problems I''ve had with HP printers over the years. I vowed to give up on HP when I bought a new printer.Enter the Samsung CLX-6200FX.
It took me all of about 5 minutes after getting it out of the box, to print something. If it were an HP, I would have had to endure 20 to 30 minutes of software installs. One after the other. They try to install everything they can, most of which you''ll never use. With this, I put the disk in, clicked a couple of times, told it that the printer was hooked to my network and voila... I was printing.
Did the same install on 3 of our other computers in the house, all hooked into my wireless router. (Actually, one of our computers is wired into the router and the other three are hooked via wifi t o the router.
It''s relatively quiet. It only takes a few moments to warm up from being asleep. Print quality is just fine. It feels solid. Not cheap. It weighs a TON. Be prepared to have either a tall man to lift it out of it''s box or to be creative and break down the box with a knife to get to it. It''s really heavy and not easy to get out of the box with the box intact.
I especially like that the software allows me to fax a document from my computer, just by selecting the fax driver when I go to "print" it. The first time you do it (if you''re accessing it via a router) you have to make it "find" the printer but it only takes a second or two. Then you can fax away. AWESOME. (You have to have the machine hooked to a phone line, of course.)
I just can''t tell you how nice it is to have a good quality printer that doesn''t try to install the space Shuttle''s operating system when installing the driver. Quick and easy and very smooth. Thanks, Samsung.
Incidentally... I was stationed in Korea 20 years ago and Samsung was thought of as a REALLY cheap electronics maker that made crap (Goldstar and Samsung = cheap crap.) Oh how that has changed. Samsung is probably THE premier international electronics company now. Probably even better than Sony, for the most part. (IMHO)
Update 1/3/12: I''ve had this printer now for 2.5 years. Still works great. However, I did lose the ability to scan a document to my computer desktop. This could be a configuration issue, not sure. But I can still scan an image file (jpg) to a thumb drive via the USB port. Just can''t scan to a PDF file. That is definitely annoying. But the printing still works like a charm. Best investment I''ve ever made in a piece of hardware.
Read Best Reviews of Samsung CLX-6200FX Color Laser Multifunction Printer Here
I got this unit because of the bang for the buck, and was impressed at how open they were in supporting Macs and Linux. I am thrilled at how great it works, especially with Macs. I have an all-Mac network and connected this unit through ethernet to share the printer. You have to go to the Samsung site to download the software separately, but once you do, it''s smooth sailing.My Leopard and Tiger machines immediately found and configured the printer via Bonjour, but I also used IPP on a couple with no problem. There''s a native Mac "Smart Panel" to control some default settings, but the main administration is done through a web interface on the machine. There''s also a Java applet to let you view the print queue, but Leopard''s native print queue viewer does that just fine. The TWAIN drivers work fine in Photoshop, and you can scan through ethernet with it. Samsung definitely took care of Macs with this release.
Want Samsung CLX-6200FX Color Laser Multifunction Printer Discount?
We like it, it''s reliable, print output for color is ok, not steller. It also seems slow. When we select to copy, it warms up. Fax, "Warming Up" we get ''registering'' all the time. Wouldn''t likely buy another one, but the price and delivery were good. Support from Samsung is marginal to bad.
0 comments:
Post a Comment