B410D Laser 30PPM 2400X600DPI USB 32MB Dupl PCL5E 120V Save 34% off

• 30 ppm print speed; 5.5-second time to first page
• Clear, crisp output at up to 2400 x 600 dpi
• Separate toner and image drum configuration for lower operating costs
• Compatible with Windows Vista, XP, 2003 and 2000; Mac OS X 10.3 and higher
• 297 MHz processor

Firstly, I think this printer is the best in the similar prices.

Good point: Quick printing, not so big size, no problem with Mac Os.

Worse point: PDF Speed, Duplex, Printer Driver, Noise, Setting.

I comment only worse point.

Firstly, this the speed of printing PDF is very slow.

I do not reason (probably due to the shortage of memory of printer).

The speed is really irritating me. But other type of files are no problem, very fast.

I found the one solution. It is to choose the option "Print as Image".

Then, we can print as same as other files.

Nextly, due to old printer driver,

we can not set the details of print such as amount of inks.

I mean that we can not choose the normal or safe mode for the consumption of ink

But if you do not care about this, no problem

Noise is a little bit problem. But may be not so much.

Again, this printer is really good and cost performance is really nice.

But you have to choose the option for pdf printing each time,

and you can not choose and adjust the consumption of ink due to too simple printer driver.

My conclusion is this is the best for people who just wants good laser-printing

and do not care about the detail setting.

Buy B410D Laser 30PPM 2400X600DPI USB 32MB Dupl PCL5E 120V Now

I bought two of these printers. The B400 series are really designed for a office network. They are too big and noisy for a desktop.

I am running XP. My HP Laserjet 1100 with 120K copies puts out more consistent and better quality print than the Okidata, hands down. I can take anything except poor output.

When it starts up to print even a single page, the fan speeds up and the noise goes up dramatically. It feels like it is girding for battle.

My two Oki b410 printers are currently one month old and I am getting ready to send them to the landfill. It really really really hurts to throw them away.

I think it is the software. All printers have internal software that translates the output from the computer into printed output. The software is critical to good output and often is a major part of the expense of the printer. Oki b400 models are physically impressive, but the software burned on the chip inside the printer is sorely lacking.

Read Best Reviews of B410D Laser 30PPM 2400X600DPI USB 32MB Dupl PCL5E 120V Here

I sell lung testing equipment that needs an external printer. This Oki B410D does a great job of printing text and graphics at a good price. PCL5e works perfectly for me.