Showing posts with label perforated copy paper. Show all posts
Showing posts with label perforated copy paper. Show all posts

Brother HL-2140 Laser Printer

Brother HL-2140 Laser Printer
  • Personal monochrome laser printer prints up to 23 ppm
  • High-quality 2400 x 600 dpi resolution
  • Toner Save Mode for extended toner life
  • 250-sheet capacity tray
  • One-year limited manufacturer''s warranty

I had considered purchasing a laser printer in the past, but my little inkjet seemed more cost-efficient. Now that I''m into my dissertation and need to print 20+-page articles every few days sometimes 9 or 10 at a time the inkjet is no longer useful for my purposes. I saw this printer for very cheap at Staples and decided to go for it.

I am unsure about real-life cost-effectiveness, since I''ve only had the printer for a few days. I am still using the starter toner that came with the printer. It has lasted through about 250 pages of full text so far. I ordered the high-yield (2,500-page) toner from Staples for $61 including tax. Drum replacement looks to be about $100 every 12,000 pages (every 4 toner cartridges). That says it will cost about $350 every 12,000 pages or so, if the printer lasts that long.

This printer is small and light, and very simple. When it runs out of paper, it gives the red error message. You add paper, press the single button, and it works again. Startup-to-print time is very quick less than 10 seconds after flipping the power switch. I was stunned at how fast pages came out of this little thing (quicker even than the HP 2300 I have in my office). And yes, the lights in my apartment dim when it prints.

I use this with a Macbook Pro over Airport Extreme (it worked! first try!)

I am confident in my purchase. (But not so confident that I waived the $15 warranty option when I purchased from Staples for $69 after rebates!)

2 caveats: this printer does not come with a USB cable (but my $3 USB 2.0 cable worked just fine.) As I said, it only comes with a starter toner, which is supposed to last only 250 pages (mine has lasted exactly that, and no fading yet).

Buy Brother HL-2140 Laser Printer Now

This printer works pretty well, the only problem I''ve had has been a few paper jams. If the rating was based on the printer only, I''d give it 4 stars.

But unfortunately the printer will stop working when the toner is supposedly low. Of course, Brother had to make the printer stop working because otherwise you''d see that there was still toner. My printer stopped working after about a week with the "toner is out" message, which was ridiculous. Fortunately there is an easy way out of this scam, simply put some opaque tape on the transparent window area by the gear on the toner. My printer has printed hundreds of pages since the printer stopped working due to low toner....

Read Best Reviews of Brother HL-2140 Laser Printer Here

The HL-2140 printer is a good value. It is fast and fairly quiet while producing high quality prints. I have an HP LaserJet 1022 as well, and this printer seems to make prints of comparable quality. The HL-2140 is fairly space efficient, so it fits on a medium-sized desk without taking up too much space.

On the downside, I have had some problems printing some PDF files. The HL-2140 will occasionally print only the first page and the print queue will stop. It is either a problem with the printer driver or Mac OS X 10.5, as I can resolve the issue by restarting my computer. It''s disappointing, but I''m confident I''ll get the issue resolved either by another driver or Mac OS update. And for the little that I paid for this printer, it isn''t a big issue for now.

Also on the downside, the HL-2140 doesn''t have a very robust manual input tray. It cannot hold a stack of paper -you literally need feed one sheet in at a time as it prints. I have tried to print on 4x6 notecards, and the HL-2140 simply gave an error message. I haven''t yet tried printing on envelopes, but I''m somewhat suspicious it will work well. I''ve had little trouble printing on different sized media with HP printers in the past -if this Brother printer can do it, it isn''t quite as obvious or intuitive.

Overall, this is good for occasional use on standard 8.5" x 11" paper. If you need to print on various media or use the manual input tray often, this isn''t the right printer for you.

******UPDATE 11/21/08*******

The issue of printing PDF files using Mac OS X 10.5 has resolved itself. I have no idea how the problem was fixed as there have been multiple updates of printer drivers, Mac OS X, and Adobe Reader that have occurred in the meantime.

I''d like add a point about the manual input tray in response to a post here. In contrast to the HL-2140, my HP LaserJet 1022 is capable of handling several pieces of paper at once in the manual input tray. That is, if I''m printing on a different paper stock than what is in the standard input tray, I can load several sheets and have them securely sit in the manual input tray (though not more than 6-7). The HP printer will print on one sheet from this tray at a time until the tray is empty. This Brother HL-2140 is incapable of doing that -you do have to manually feed one sheet in at a time and stand by the printer to do it.

Want Brother HL-2140 Laser Printer Discount?

I needed a second laser printer for my office after my 1994 HP model finally died. I chose this one because it was inexpensive and because I''ve had a Brother 1440 laser printer at home which has been very good. The only downside to the 1440 is that it causes the pages to curl -a problem that many older Brother Laser Printers have. I''m happy to report that there is no page curl with the 2140. I''ve only had this about a week, but so far it''s great. Very simple to set up, and EXTREMELY fast. Note that this machine requires a USB cable which is not supplied, and the supplied cartridge is only rated for 250 pages, so you''ll be spending a bit more money than just the cost of the printer.

After a month using this printer, I''m delighted. Compared to my ink printer, the brother prints at lightning speed. And every time I print something, I smile at the money I''m saving.

I am a writer but I often prints color photographs too, so I was using color photo printers for years. But in the midst of printing black on white manuscripts, a window would pop up to tell me I had better change the magenta cartridge or risk damaging the machine. I thought the machine might use a touch of magenta when printing black, but when the photo cyan cartridge gave out, I suspected something devious.

I calculated what I''d spent of ink cartridges for the past year and realized I could buy the brother HL-2140 plus enough toner to print 26 manuscripts of 400 pages each for the same amount. So I did.

The installation instructions that came in the box are clear, simple and precise. In ten minutes, I had the HL-2140 printing. But I had two problems.

Printing the same page on both printers, I noticed that the brother does not get the letters as black as the color printer does. Although the sheet printed on the brother is fine, no quibbling, I tried to get a darker print. In "print properties, advanced" I changed the resolution from 600 dpi to 1200, but noticed no difference between the two. I tried using "graphics" instead of "general." That didn''t help either.

Reluctantly I accepted that when all else fails I have to read the instructions. The user guide did not come in my box, but I quickly found it on the brother website and downloaded the Acrobat file. I found the solution is the density adjustment slider, which is not easy to find. Go to Printer/Properties/Advanced/Device Options and select "Density Adjustment" for the list to activate the slider. This option does not work if 1200 dpi is selected or with Macintosh computers. But with Windows at 600 dpi, I could replicate the results with my ink printer.

My other problem was the brother printed last page first, forcing me manually restack the document. After reading the manual twice, I couldn''t figure how to solve it. (Please stop laughing.) Finally, I discovered I had the "Reverse Print Order" box checked in the Windows printer options dialogue. Windows, not the print driver controls this option.

But reading the manual served me well. I learned the brother HL-2140 has an impressive array of duplex print options and other features. This machine is a super good value.

Kantek Height-Adjustable Stand with Drawer, 17 x 13 1/4 x 3 to 6 1/2 Inches, Black (MS420) Save 33% off

Kantek Height-Adjustable Stand with Drawer, 17 x 13 1/4 x 3 to 6 1/2 Inches, Black
  • Accomodates monitor, laptop, printers and fax machines
  • Extra large, sturdy 17 x 13 1/4 Inches platform
  • Raises monitor or laptop to a comfortable viewing level
  • Height adjustable from 3" to 6 1/2", in 1 1/4" increments.
  • Includes organizing drawer for paper, files, and supplies

It''s a computer stand that looks sharp when paired with a black monitor. I''ve only had it for a day but it looks well built and sturdy. The tray has a little resistance to pull out but it''s not an issue. If you''re worried about finding the right height up to 6 inches this is the tray for you. There is 4 separate pieces for each leg that connect together similar to Legos. This allows for the perfect height. Absolute 5 star product

Buy Kantek Height-Adjustable Stand with Drawer, 17 x 13 1/4 x 3 to 6 1/2 Inches, Black (MS420) Now

This is a really great monitor stand. It''s built very sturdily no bowing whatsoever with my 27" monitor and several bowls of office supplies on top. The adjustable legs are great (I used all of them for maximum height). The drawer is very convenient for pens, notepads, and whatever random little items you have that would otherwise be cluttering up your desk.

The design of this stand is superior to most other designs for the following reason:

1. adjustable height in addition to just being common sense, if your office chair changes, or you decide you prefer reclining more or less, you will need this feature.

2. sturdiness of plastic this is very important because any bowing will affect the height and angle your monitor ends up assuming over time

3. large enough to fit laptop underneath make sure to check the dimensions of your laptop before buying a stand make use of that vertical space.

4. access to laptop from all four sides for ease of access to ports, power cables, etc.

5. drawer if you have to add six inches of height, again, you want to make use of that vertical space, and a drawer is an excellent way to do that.

My only problem with this stand is that the drawer doesn''t slide out smoothly, but a little graphite powder should fix that.

Highly recommend!!!

Read Best Reviews of Kantek Height-Adjustable Stand with Drawer, 17 x 13 1/4 x 3 to 6 1/2 Inches, Black (MS420) Here

I used this stand for my Ham radio transceiver in order to have more room on my desk for papers, pens, books, etc. The drawer is very handy for storing supplies, microphone, and my headset. The adjustable height is a grea assest for too.

Want Kantek Height-Adjustable Stand with Drawer, 17 x 13 1/4 x 3 to 6 1/2 Inches, Black (MS420) Discount?

It''s a sturdy with typical keyboard plastic look so it will not seem cheap in an office. I liked the drawer even when it takes a little extra effort to open than a regular desk drawer, it doesn''t have rollers it slides plastic against plastic. Measure your laptop if you want to store it under it, most small laptops will fit, but if you have to open it to turn it on every day... you are in for some problems. Other than that I think it''s a good value tool. I''m not using it anymore, I gave it away to another person in the office that takes her laptop home everyday and he''s really satisfied since she turns the laptop first and then stores it. For the end of the day, she just turns it off and unplugs the laptop.

If you want it as a stand for a desktop, I don''t see any negative side on this item. Adjustable legs are easy to place or take off without compromising stability onces it''s set to desired position.

Save 33% off

This is a sturdy stand for a monitor and seems to be well built, but it is NOT 6.5" tall as advertised, which doesn''t make me happy. This stand measures only 6" tall, so this amounts to misrepresentation. Someone needs to learn how to measure, seeing that it''s not a hard concept.

HP Laserjet Enterprise 500 Color M551N

HP Laserjet Enterprise 500 Color M551N
  • Bold color and crisp details with HP EasyColor technology
  • HP ePrint?print from virtually anywhere using your smartphone or tablet
  • Save energy with HP Auto-On/Auto-Off technology

What I offer here is more of a "first impression" after having printed only 545 pages on my new HP LaserJet 500 color M551n printer. I can say that so far, the HP has performed flawlessly. This is a very nice, very well constructed, solid (and heavy) color laser printer. So let me give you some specifics.

Going from the box to your point-of-use is not going to be easy. This is a heavy printer (75 pounds but it feels heavier) and most people will want or need someone to help them move it. I helped the delivery driver take it off the truck and walk it into my garage. My wife then helped me get it out of the box and from there I slowly and laboriously carried the printer up to my office. Once in place though, you''ll be printing in no time.

Setting up, and connecting to, this printer was easy. I have it installed on my network. I use Windows 7 Home Premium. Between my operating system and the HP software the printer is recognized without any difficulty. The software that comes with the printer was not the most current which I found to be only mildly frustrating. But installing updated software from HP''s website is straightforward.

Image quality is much, much better than I anticipated. In fact, I''ll say it''s absolutely beautiful. Skin tones, for example, are perfect and there''s no banding on a full-page image. And I''m just using plain paper at the printer''s default setting of 600 × 600 dpi. I do a lot of PowerPoint presentations with graphs and images and the color/image quality is great.

This printer is very fast. From sleep mode, when you send a print job, the first page is out in 18.5 seconds. If the printer is already awake, it prints the first page in 10.9 seconds. These speeds are based on my sending the print jobs from my notebook computer which is connected wirelessly to my network.

I purchased this printer to replace a Xerox Phaser 8650 that simply could not print without regularly producing a paper jam. That was a huge and unacceptable aggravation for a new printer and it is my biggest "anticipated" though, as yet, unfounded fear with my new HP. Based on having owned two Xerox Phaser printers (the 8650 and an 8550 Phaser before that), both of which were highly rated, all I can say is that I will never buy a Xerox Phaser printer again. I''m now an advocate for HP laser printers. If I run into any problems I''ll be sure to provide an update. Until then, I think you will be pleased with this printer.

Buy HP Laserjet Enterprise 500 Color M551N Now

I wanted to order some color flyers for the launching of my new business. All directions were going to cost more for shipping to Alaska than the printing of the flyers. I researched and found good reviews on this printer. When it arrived I had a bit of trouble getting the feeder to not jam. However, after reaching commercial tech support they guided me to a missed shipping tab that when removed made my printer work perfectly. The color is amazing, the ease of use is great. I love HP printers and this color laserjet is no exception. I highly recommend it.

Read Best Reviews of HP Laserjet Enterprise 500 Color M551N Here

Background:

I purchased this enterprise printer as a replacement for an older LaserJet 3600n that was approaching end of life. I have two of those with one still in service and have found them reliable. We use these printers in a small office with 3 people, and periodically print large documents 1000 pages or more.

The Good:

The new printer is certainly easy to install and prints like the wind. Print speed is awesome and the paper drawer takes an entire ream at once, also a major convenience. Lovely print quality too. A further benefit is that the toner cartridges are significantly physically smaller than the ones for the 3600n, saving storage space (I keep two sets on hand).

The Bad:

We often print documents that contain both landscape and portrait pages. It is mandated by our clients (and regulatory agencies who receive our end product) that when put into binders the landscape pages be oriented with the header at the spine of the binder, that is rotated counterclockwise.

Turns out that printing to this thing from MS Word that is not possible. HP online support is not only difficult to get to but did not understand the problem or offer a solution. Their online chat community is much friendlier but also did not have a solution.

The workaround is to first print to PDF and then to print to the LaserJet 500, but this is ridiculous in an enterprise printer.

Yes, we''ve tried all of the available settings. Yes, I''ve installed alternate drivers. Yes, I''ve tried this with 4 different computers. Always the same performance LaserJet 500 rotates landscape pages clockwise, all other printers in my office counterclockwise.

Personal opinion is that I''d send the thing back if I''d purchased it from Amazon (like I usually do) but in this case I got it directly from HP.

Recommendation:

Buy it if you only print documents with a single orientation.

Buy it if you only print from Acrobat.

Buy it from Amazon if you are unsure.

Note that if I get drivers that work (or any other help from HP) I''d raise my review to 5 stars. HP support would still get significantly fewer.

Update: For whatever reason I decided to try installing PCL5 drivers. Voile, it now works properly. The only issue (actually a non-issue) is that the icon for the printer now shows some sort of multifunction device.

HP was no help in any regard. While they clearly design fine printers I''m not convinced that they know how to do software V&V on their drivers. Fortunately older versions are still readily available.

Want HP Laserjet Enterprise 500 Color M551N Discount?

We have used this printer for about a month and all is well. The startup period from sleep to print is around 20 seconds which is a major improvement over our last printer.

We use it to print high color graphics on glossy paper for sales purposes as well as normal document printing and it works flawlessly.

The paper tray actually rolls out smoothly and doesn''t feel like it can be broken with normal use. The paper itself fits in the tray sideways which prevents the weight of a full reem from pressuring the paper sizing bracket inside the tray when you close it. We had many problems with false paper jams on our last HP from this very issue.

The management web interface is also much improved and is very useful.

Overall this is a great printer.

This "top of the line" printer will not handle the heavy weight stock that it is advertised to print on. On stock up to 28 lb. paper, it does a good job, Above that, after printing five or six impressions, it begins to smear. Since it cost over $700.000, we are disappointed in the result. From additional internet searches, it looks like the ability to do what we want will require a printer that costs twice as much. Still undecided what to do.

HP LaserJet 1160 Monochrome Printer

HP LaserJet 1160 Monochrome Printer
  • Up to 1,200 dpi effective output
  • Up to 20 ppm speed, first page out in less than 10 seconds
  • 133 MHz Motorola processor, 16 MB RAM
  • 10,000-page per month duty cycle
  • Parallel and USB 2.0 interfaces; PC and Mac compatible

Pros:

Dramatically improved design

Improved print quality

Speedy output

Small footprint

Solid paper handling

Cons:

More expensive than competitors

Cryptic LED status lights

Does not accept higher capacity toner

Flimsy single-sheet multipurpose input tray

Poorly written printer driver and installer

No printed manual (only PDF file on the CD)

HP LaserJet 1160 is a feature-stripped version of LaserJet 1320, replacing LaserJet 1150 and LaserJet 1300, respectively. 1160 and 1320 share the same engine and chassis (1320 features white-with-black-accents whereas 1160 is all-white). Perhaps the most dramatic change from 1150 and 1300 is a redesigned chassis. They no longer resemble DeskJet''s L-shape box with protruding input paper tray, infamous for causing paper to curl up if many sheets are stacked on its output bin. Both 1160 and 1320 now look more professional and spiffier, all the while occupying even less desk space.

More subtle but just as dramatic is improved print quality. 1150 and 1300 were criticized for worse print quality than their predecessor (LaserJet 1200). 1160 restores the former glory with improved print quality. Graphics and photo outputs look noticeably smoother than LaserJet 1150 and 1300 with less noticeable dithering. Text looks sharp, and it looks slightly better defined in 600 dpi with FastRes 1200 turned off (graphics look far better with it turned on, however).

If you need more reasons to justify 10% price increase over 1150, how about 10% faster print speed? With double the memory (16 MB vs. 8 MB) and smaller footprint (measures about 14 inches by 14 inches vs. 16 inches by 19 inches), 1160 represents a superior value.

That said, 1160 could''ve been better. 1160 loses 1150''s 10-sheet multipurpose input tray (1160 accepts only 1 sheet at a time). And multipurpose single sheet input tray feels a bit flimsy, although 250-sheet input tray feels very sturdy and should last a long time. And according to HP, 1160 can accept only the standard capacity toner (prints 2,500 pages at 5% coverage). Also disappointing are LED status lights (LCD alphanumeric display would have been more informative).

I have 1160 connected to Apple AirPort Extreme Base Station (via USB port) so that I can print wirelessly. Apple PowerBook G4 (Mac OS X 10.3.5), IBM ThinkPad A31 (Windows XP Professional Service Pack 2), and Compaq Presario X1000 (Windows XP Professional Service Pack 2) notebooks share the network and printer.

Included Windows installer did not make installation process any easy. If the printer is NOT directly connected to the computer via USB or parallel port, it will not let you install the driver (Mac OS X installer is more forgiving). Network detect feature did not work and I suspect it works only with JetDirect option. After reading the manual on the CD, I have discovered a workaround. Manually add the printer as a local printer, create a new TCP/IP port and specify wireless router''s IP address (10.0.1.1 in my case), then click "Have Disk" to install the driver manually. The manual points to wrong directory path. The correct path for English-based Windows XP driver is English\Drivers\Win2003_XP\PCL5.

The driver is not any better. It is not that printer driver itself is that bad (although I have found few minor bugs). My issue is with hp toolbox, an application that supplements the driver. It is written in Java with embedded Apache web server (talk about bloated!). It feels rather sluggish with ugly interface.

That said, the printer works well and hp toolbox should not detract you from using the printer to full potential. And Mac OS X support is nice. When you print, a photo realistic LaserJet 1160 icon appears on the dock showing which page is printing.

If you are looking for true 1200 dpi printing (1160 prints at 600 dpi, only emulating 1200 dpi via REt and FastRes technologies), expandable memory, PCL 6 and emulated PostScript 2 compatibility (1160 supports only PCL 5e), automatic duplex printing, and higher capacity toner compatibility (6,000 pages at 5% coverage), consider 1320.

Buy HP LaserJet 1160 Monochrome Printer Now

I''m delighted with this printer. It''s wonderfully compact and fits in tight spaces. The printer quality is excellent and it really feels solid. I expect it to be as reliable and long-lasting as my previous printer, an HP LaserJet 6MP. This printer worked right out of the box with my Macintosh running OS X 10.3.x and I suspect that setup for Windows is equally painless. Yes, it''s a little more expensive than comparable laser printers, but I think that over time the slighly greater inital investment will have been worth it.

Read Best Reviews of HP LaserJet 1160 Monochrome Printer Here

Pros: It will print. Easy initial set-up.

Cons: It has problems printing fonts other than Courier. The way the paper in the tray loads makes it a problem to print sequential single pages (like check stock, think anything already numbered). The manual feed slot is almost worthless.

The font problem is caused, according to HP, by the driver for the printer. It is faulty, and even though HP has released an updated driver, that does not fix the problem. As of June 1, 2005, HP''s fix for the font problem is to tell you to load software from another one of their printers (which means you lose some of the funtionality of this new printer).

The manual feed is for one piece of paper at a time and is just a slot no tray or feeder support.

There are cheaper printers that will perform the same functions as this printer, without all the font issues. If I could re-purchase, I would just purchase the HP LaserJet 1012 Printer again.

Want HP LaserJet 1160 Monochrome Printer Discount?

The device is made adequately well but not as well as the HP line starting at street price $600-800 or the printers selling in the $900-1300 range, which are known workhorses, but at 4 times the cost.

Setup is easy, especially for those who use higher grade HP printers at work and know how to load and activate the toner cartridge.

I bought two of these for my twins who entered college this fall. USB setup worked fine but required loading of drivers, which is from a supplied CD, on one child''s PC, whereas the Apple machine installed totally without intervention.

The print quality is claimed at 1200 DPI and indeed appears to be so. I performed some complex registration tests consisting of running print through the machine several times on the same paper and found registration to be first rate -excellent.

The lack of a support table on the paper feeder, such as the more expensive models have, made feeding of labels and other single sheet jobs, as well as envelopes, much more difficult than it needed to be. It is unlikely that the addition of an easily accessed single page feed support would have increased the manufacturer''s cost more than a few dollars; that negligibly higher price would have been well worth the dollars in user convenience.

I did not explore the energy saving modes and cannot comment on them, but the 1160 is Energy Star rated.

Not enough experience with the supplied toner cassette to state whether it actually delivers the promised 1,500 pages at the coverage percent indicated in the claim. A purchased toner cartridge thereafter will produce many more copies. Also am wondering if the 1160 model is plagued by a timing chip on the cartridge, which I am told disables the ability to employ a cartridge right down to the last spoonful of powder when the manufacturer''s "expiration date/freshness date" has been exceeded. You can read about those chips in PC and similar magazines.

Those using the HP office printers know that rocking along two axes can redistribute toner and permit virtually 100% use of the supplied amount when the toner gets down to those final few milligrams.

The machine interior is (not surprisingly) finished more cheaply, and the chassis is more crowded, than the pricier models, so removal of paper jams is slower and less un-invasive of the operator''s time. However, continually more crowded chassis interiors has been a problem in HP and virtually all other machines for years now -every manufacturer wants the smallest footprint without regard for how that will inconvenience the user in the long run.

Overall, a much better deal for the college student not reqiring color printing than is an ink jet, where the ink costs will start to rival tuition costs before long.

HG Review written September 11, 2005 (09/11/05)

I have always been skeptical of printers it seems that whenever you need them most they malfunction. This is not the case for the HP LaserJet 1160. I have waited over 1 month from purchase to do this review just to make sure that it continued to deliver its fine performance... and it has!

What I like about the 1160

VERY fast even the most complex documents are printed in a matter of seconds.

Extremely Quiet the 1160 runs almost without any type of noise... just a low hum and *poof* your document is printed.

To date (knock on wood) I have not had a single jam! This is unheard of... no paper jams!

Great value with the rebate the 1160 cost about $250, which seemed like an exceptional value.

Setting-up and connecting to my laptop was a breeze.

In short, in the one month that I have owned the 1160I do not have a single complaint. Trust me... I NEVER thought I would say that about any printer. This is the one printer you can buy and not have to worry about.

HP LaserJet 1200 - Printer

HP LaserJet 1200 - Printer - B/W - laser - A4 - 1200 dpi x 1200 dpi - up to 15 ppm - capacity: 260 sheets - Parallel, USB
  • Home or office features fast, economical, internet-enabled monochrome printing plus networking (LJ 1200n)
  • Print, copy and scan capabilities

We''ve owned a Laserjet 1200 for six years now, and have yet to have any real problem with it. It''s a powerful workhorse that handles many printing tasks without difficulty. Even when the neighborhood power died and it stopped printing with paper caught in it, this printer unjammed without a hitch. The manual is also easily accessible online as a PDF. Pair it with the ultraprecise toner cartridge for great results.

Buy HP LaserJet 1200 - Printer Now

I had this same model printer for years and was very satisfied with it. After 10 years and well over 100,000 pages printed my first one gave out.

I bought a new printer and had more problems with it in one month than I did the HP 1200 in 10 years. I wish HP still made this printer. It is a big slower than the new models, but it is very reliable and I would gladly give up a little speed for the increased reliability.

This model is also slightly bigger than the newer ones, but not by very much.

I especially like the way it pulls the paper up. With paychecks you put them in face up and it is easier to have them print in order.

Read Best Reviews of HP LaserJet 1200 - Printer Here

Great packing and worked out of the box.

Used 6 days per week 200 + pages per day.

Want HP LaserJet 1200 - Printer Discount?

Gotta love this beast, it just keeps going, not finicky about drivers, you don''t even have to install anything on a new Mac OS. The one I used at work died, but slowly, I knew it was going out, no sudden "Oh, my printer''s just died" more like "Hey Boss, I''m going to need a new printer sometime soon" and this was after a long and productive life.

While HP''s inkjets vary in quality and durability, it has a well-deserved reputation for long-lasting, robust laser printers. This printer is superb! I

t''s very fast, largely hassle-free, and quickly pays for itself. The toner is expensive, but some comparison shopping online can usually yield a decent price. Note that there is a regular and a high-capacity toner, and the latter is usually the better deal per page.

The printer handles most types of paper with no problem. I''ve had very few jams. There is only one button on the entire unit and it''s shockingly all you need. The printer remains on at all times unless you want to unplug it after each use. The printer accommodates all paper sizes up to 8.5" wide and 14" long. One tip to avoid jams: If you use the feeder to input special paper, pull the paper out of the slot. Otherwise, the printer may try to feed paper from both simultaneously.

I''ve had this printer for nearly a decade with almost no problems. Highly recommended!

Inkpress Rag, Cool Tone Double Sided, Bright White Matte Inkjet Paper, 24 mil., 300gsm, 13x19", 25 Sheets

Inkpress Rag, Cool Tone Double Sided, Bright White Matte Inkjet Paper, 24 mil., 300gsm, 13x19'', 25 SheetsI''ve used this stock with both the Canon Pixma iX6520 Inkjet Printer (4895B002) and the Epson WorkForce 1100 Wide-Format Color Inkjet Printer (C11CA58201). Both give great results, but the Canon does a better job with blacks, because it uses two different ink chemistries for black simultaneously.

In any case, this stock is gorgeous for art prints, and also for custom book covers. Color profiles are available, although we have not used them. In either printer, we just choose the "photo quality inkjet paper matte" or whatever setting is closest to that, and the highest resolution printing.

I''ve got several prints hanging on my wall using this paper, and they are all spectacular. Highly recommended.

Please also note, Inkpress makes a Warm Tone version of this paper. I love the samples, but have yet to find a project that will work with it. Cool Tone is perfect for our work, which is mostly photographic with some illustration, all in color.

Avery Easy Peel White Return Address Labels for Laser Printers (5167) Save 41% off

Avery Easy Peel White Return Address Labels for Laser Printers, .5 inches x 1.75 inches, Box of 8000
  • Remove Labels easily with Avery''s Easy Peel feature. Columns can be separated to expose label edges for easier, faster peeling
  • Bright White Labels for sharper print quality
  • Jam-Free Guarantee
  • Easy-to-use Avery Tempalates for Microsoft Word
  • Guaranteed printer performance in HP, Canon, Epson and other popular laser printers

These labels were purchased for work to label work order packages and to label other things. Easy to use Avery software to fill out labels

Buy Avery Easy Peel White Return Address Labels for Laser Printers (5167) Now

Great little labels for a variety of uses. I''ve used this size in the past to make my own address labels and while the font has to be really small, it''s possible. When buying labels, you should always bust out a ruler and measure it out in person before you buy, especially this box because who wants to get stuck with 8000 labels they don''t want?

The Easy Peel feature is great, as when you''re using this small of a label, odds are you''re labeling a LOT of things and easy peeling just saves you a lot of time in the end with all the seconds you save adding up. The tear feature of the sheets is particularly handy if you have a bunch of people splitting up the sheet and labeling all at the same time.

Read Best Reviews of Avery Easy Peel White Return Address Labels for Laser Printers (5167) Here

These labels have been excellent for printing price tags on my new POS system. They peel off easily, and I can run one page through the printer several times, when printing only a few labels at a time.

Want Avery Easy Peel White Return Address Labels for Laser Printers (5167) Discount?

I love these labels and use them all the time. Amazon was the cheapest place I could find to get the Avery brand and I am very happy with them!

Save 41% off

In contrast to another review here, I''ve been using these for return address labels for years. 3 lines fit fine when the font is just right for return addresses. I print several sheets at a time and use a paper cutter to cut the 4 columns apart, so that I have a stack on hard that takes very little space. When it comes to sending out 250 holiday cards, these come in very handy!

Canon S9000 Photo Inkjet Printer

Canon S9000 Photo Inkjet Printer
  • High-speed, professional-quality, six-color, large-format photo printer
  • Borderless 4-by-6-inch photo prints in approximately 37 seconds
  • Produces large photo prints, up to 13 by 19 inches
  • 2,400 x 1,200 dpi resolution; 3,072 nozzles for exceptional speed and quality
  • Convenient USB interface; PC and Mac compatible

The other reviews here say it well. I switched to the S9000 after tiring of wasting half of every color ink cartridge on cleaning cycles on my Epson. The S9000''s been 100% reliable, without a single clog. Photo quality is on par with Epson''s -that is, superb. And the printer driver''s been updated since the spotlight review was written -this version does include a Print Preview feature. The 13x19 prints are absolutely stunning! And this thing is amazingly fast.

Just two downsides. First, you need to be sure to use the right paper. With Canon Photo Paper Pro or Epson''s papers, prints look fantastic. With Kodak and some other brands, the ink pools and you get a "spotty" appearance. Second, the printer won''t do borderless prints at 13x19. The borderless 8x10 and 4x6 prints look great, though.

Buy Canon S9000 Photo Inkjet Printer Now

This was the first photo printer I have ever purchased, and got it because of the large-format printing ability. I had it narrowed down to the Epson 1280 and the Canon S9000, and after reading an excellent review discussing these very 2 printers (such luck!), I chose the Canon for "slightly superior photo quality". Epson is well-known for its printers, but Canon apparently has become quite the competitor, just from what I''ve read and researched. (I recommend checking out Steve''s Digicams wesite for some in-depth reviews if you are interested.)

I ordered this printer on a Friday evening with ground shipping. It arrived Tuesday afternoon. Kudos to Amazon and UPS for making the delivery quicker than I imagined possible.

Ok, so I opened the box and everything was there, so far so good. Set-up was easy, a la Canon (I also have a G2 camera), BUT be warned, there is no USB cable included to attach the printer to your computer! I knew this to be the case and had an extra one so it was no big deal, but Canon, what''s the deal with that?!? You couldn''t supply a simple little cable with your printer? Go figure.

I went ahead and printed a "test shot" that I found on PhotoDisc.coms'' website. They have a few excellent test photos available for this purpose download is free. This particualar photo had every color imaginable, flesh tones, black and white, every day objects (fruit, flowers, stamps, colored pencils, you get the idea). Every object was printed with incredible color accuracy and detail. So far so good.

I went on to print some headshots I had taken of me w/ my G2 that I had photoshopped. Again, excellent detail, color representation, etc etc etc! I printed about 10 8x11 shots, and all are vibrant, beautiful, crisp everything I would expect from a photo lab (who, btw, printed one of my headshots last week **too dark** and they wonder why we customers are getting all savvy with our OWN digital darkrooms!)

I have only used Canon Photo Pro paper and Canon Photo Paper Plus Glossy. I will be trying out the large-format papers as soon as I''m sure I know what I am doing (so I don''t waste paper, which yes, is expensive, but well worth it in my opinion).

I did experience some banding on one shot, but realized that I had not set the paper settings correctly in the dialog box before sending the print to the printer. I re-set them for the correct paper, re-printed, and voila! A perfect print. My fault, not Canon''s. :)

I will update this if I experience problems, as of now however this printer is going to be an incredible investment and I am SO pleased to have made this purchase!

Read Best Reviews of Canon S9000 Photo Inkjet Printer Here

The quality of output from this printer is amazing. I had no idea that inkjet technology had come this far. I was truely shocked with how beautiful the photos came out in 4x6 and 8.5 x 11 paper size borderless! Of course, the quality of the data makes all the difference in the world. If you take a picture with a cheap digital camera, you will not get great results. Also, you must use quality glossy photo paper designed for inkjet printers. In my case, I used the Canon G4 and the Canon Photo Pro paper. The 8.5 x 11 image I printed was as good or better than what I would expect from a film camera. I have yet to try the 13 x 20 size I need to get a better camera for that. I cannot imagine anyone being dissappointed with this printer.

Want Canon S9000 Photo Inkjet Printer Discount?

I''ve used HP printers in the past, and have a HP1200c and HP970cse that are still in use. When I decided to do some larger format printing(beyond 8X10), didn''t see anything from HP that would print this size. In addition, I wanted a printer that did not have all the color inks in one cartridge. Based on reviews from this site and Steve''s digicam website, took a shot on this printer. I could not be happier. I have an Olympus e-10 digital camera, and have been able to produce some outstanding 13X19 inch output. Have also done quite a bit of 4X6 borderless printing, and these have worked as advertised. If you have the money to spend, and want to feel like you have your own photoprocessing lab at home, this is a great printer.

Right out of the box the Canon S9000 is everything they claim.....fast, quiet, and most importantly Great Photos ! I''ve had my eye on the Epson 1280 for a while but when the S9000 came out I''m glad I waited. My first printer (other than a dot matrix) was a Canon BJC-610 and it was a great reliable printer and I tend to stick with brand names when I''ve had good luck with them. As stated in the company literature set-up is straightforward and simple, I run XP-pro and had the printer hooked up, ink installed and printing in about 15 minutes. The print alignment page came out very well and no adjustments were necessary. The first print out was on plain paper and had excellent detail. Next was a picture I took of my son and his girlfriend at a nightclub, it was approx 1.2mb and was taken with a flash on a Kodak dc4800 camera. I printed on a generic brand glossy photo paper, 8 1/2" X 11" the result was outstanding, great resolution, fantastic color, black background was perfect. Next was a print I downloaded from the internet, a 5.4mb aerial view of the World Trade center. I printed on Kodak 11" X 17" glossy photo paper. Wow! the resolution was out of this world. crisp details I took it to a friend who is a professional photographer and he was very impressed.

Now for the bad news, the only reason I didn''t give it five stars. The software leaves quite a bit to be desired, no print preview! When I''m printing on paper that costs more than a dollar a sheet I''d like to see my layout before I print. I know with time I''ll get used to the software but most likely I''ll end up getting a third party software such as photoshop.

Overall I give this printer two thumbs up. Good looks, quiet, fast, and most importantly Great pictures !

E460DW Mono Laser Printer

E460DW Mono Laser Printer
  • The Total Package, Wirelessly. Connect to your secure wireless network in a snap with Wi-Fi CERTIFIED(TM) n connectivity. Ideal for reducing printing costs, with built-in duplexing and available Lexmark Extra High Yield Toner Cartridges that deliver up to 15,000* pages. (*Declared yield in accordance with ISO/IEC 19752.)
  • Keep Your Productivity Up. True 1200 x 1200 dpi print quality and performance features like a rapid time-to-first-page as fast as 6.5 seconds help you perform at your best. Not to mention built-in networking for easy sharing and paper handling accessories that let you expand total input capacity to 850 sheets.
  • Fuss Less, Focus More. Brings hassle-free printing to your fingertips. Experience enhanced security and time savings with a range of high-end features like technologically advanced 802.11n wireless connectivity.
  • Print Black, Think Green. Designed with eco-conscious features like Eco-Mode and an instant warm-up fuser to help you save paper and energy. Recycle your empty cartridges free of charge through the Lexmark Cartridge Collection Program. Printing responsibly means everyone wins - your business, your budget and the environment
  • Lexmark Guarantee. Lexmark''s 1-Year Exchange warranty on the Lexmark E Series provides sound peace of mind. Enhanced service offerings are also available. Optimize your printer''s performance and investment value by using genuine Lexmark supplies, service and parts.

I bought this printer because PC World rated this one of the Top 10 monochrome laser printers: (actually, the E460dn model). I also wanted the printer to have a wireless network interface, so I went with the E460dw.

The printer toner cartridge comes in a plastic frame that is wrapped in a foam layer. The installation manual that comes with the printer as well as a picture card attached to the foam layer describe that the cartridge and frame must be pulled out, and you must remove the foam layer, and then re-insert the frame and cartridge. Simple enough, right? Well, it just so happens that when I tried to pull out the cartridge, the left side was stuck. I thought I just wasn''t pulling hard enough, so I pulled harder, and the cartridge came out. BUT, I broke a small plastic hinge in the process. I went to the Lexmark Tech Support site, and behold, one of the top Knowledge Base articles says this is a known issue: [....], Knowledge Base article ENUS32262: "The Toner Cartridge (Print Unit ) Is Stuck Inside a Lexmark E260, E360, or E460 Printer". Now why didn''t Lexmark put a warning message somewhere inside the printer to warn customers that this can happen?

I called Lexmark Customer Support, and filed a customer care ticket. Wait time was less than 5 minutes, and I was greeted by a very helpful customer care rep who gladly said he would immediately send a printer replacement with a return shipping label. I received the replacement printer within a few days (it was the July 4th weekend), and shipped back the original printer.

Overall, I am very satisfied with Lexmark''s customer support.

Installing the printer driver on my Mac, on the other hand, was tricky. The E460dw has a built-in Web server that broadcasts on its own private wireless SSID. I entered my home SSID and WEP password, and clicked Submit, only to find the printer can''t be reached on my wireless network. I then realize that the set-up page also asked for the wireless channel number, whose default is Channel 11, which is different than the channel my wireless router is set up with. Fumbling through the user manual on the installation CD, I found that I had to connect to the built-in Web server by powering down the printer, attaching an Ethernet cable to the printer, and powering the printer back on. After the printer started up, it suddenly print a test page, which contained its IP address. I hit that IP address on my Mac, and behold, I connected to the printer''s Web server again, and this time, I set the wireless channel correctly. But I still can''t see the printer in my Network settings on my Mac using Leopard. I can only see the printer if I have it connected using an Ethernet cable. I paid extra for the wireless network interface, and I still need to figure out how to make it work with my Mac.

But overall, the printer is blazingly fast!

Buy E460DW Mono Laser Printer Now

previous reviewer''s comments somewhat helpful. I needed to change the IP Address on the printer itself (the embedded webserverI guess). The manuals don''t explain what or where the embedded webserver is. it took many hours to figure this out. the options are on the printer lcd,hit the menu button on the printer then navigate through to the screens: settings, general settings, setup menu, netwk/ports, network1, net 1 setup... to find where to set the IP address. it was much easier with my epson which was truly setup in a snap. printer arrived Friday evening started setting up printer Saturday at 2pm. had to stop and restart at 5p.m. gave up at 6:21p.m. tried again until 10p.m. tech support closed at 6p.m. on Saturdays. why is this soooo complicated.

Printer seems solidly built, easy to use (except the install on wireless netwk part).