- 1 to 2 sided printing,copying, and faxing
- Print and Copy up to 23 ppm
- Quick First Print provides first copy in approximately 9 seconds
- Built-in Networking and Energy effcient with only 3W of energy used
- 35 sheet ADF and 250 sheet Paper Cassette tray
I couldn''t find any reviews for this item so I will tell you everything I can about it.
I know there is some comparable Brother models out there, but have heard they surge the power in the room. I haven''t tested them, but I have a Brother laser printer and it makes all the lights in my home office dim when it gets ready to print. Also that model doesn''t duplex print (print/copy on both sides of the page. The MF4370DN does.)
This unit works great with my Mac it scans, prints, copies, and receives faxes. I originally bought the Canon MF4350d which despite all the information I read is not entirely mac compatible, its scanner is not compatible with Macs, which was confirmed for me by talking with a Canon rep. It would be nice if they mentioned that on their website specs instead of wasting hours of my time and then having to drive 70 miles to return it. (I didn''t buy it from Amazon because they didn''t have it at the time.)
Canon support told me the MF4370dn is entirely mac compatible just hit the Scanner button on it twice so it is in "USB SCANNING MODE."
Overall I''m pretty happy with this unit. The print quality is great, the faxing speed and quality is much faster than my old thermal fax. The copier works great. The scan quality off the glass is great. The duplexing feature works great. Unit is very, very quiet in fact I can''t hear it when it''s on or sleeping.
Now I can finally get rid of three bulky devices my fax, laser printer, and scanner, and replace it with this one unit.
Cons:
1) No software comes with this unit that allows you to create a single PDF from the Auto Document Feeder. So if I wanted to scan 10 pages through the feeder and create a single PDF it can''t do it. It would create 10 different documents in your scanning program, then you would have to save each one as a PDF and use another program to create a single PDF. After hours of research I discovered Acrobat Professional can create a single PDF directly off the auto document feeder. Acrobat Professional is an expensive program at $449 which is available for Mac. I happen to have it and used it successfully to create a multipage pdf. On Acrobat Professional you go to FILE > CREATE PDF > FROM SCANNER. It worked great. But some kind of software should really be supplied from Canon that can do that. Most people are not going to have Acrobat Professional and certainly won''t buy a $450 program just to be able to use a $300 device. I know there is some scanning software that comes with the unit, but it''s for Windows (and not sure what it can do.)
2) Auto document feeder also is giving me some trouble it is scanning letter size pages as legal size. So there is all this white area at the bottom of my scans. Something I will have to talk to Canon about how to fix, if possible.
3) My home phone number doubles as my fax line so I run the telephone line from the wall into the unit -and then then out to my phone. Whenever I use my phone to make a call the MF4370DN turns on and starts to blink "Processing Data" and a green light on the side of the unit starts to blink as well. And it stays on for the whole call. Now when I talk on the phone I gotta see this light blinking in my periphery. Kind of annoying and a waste of energy if you ask me.
4)The instructions for using the scanner were not very clear. I installed what I thought was a scanning program on a CD that came with the device. After I installed it I thenspent ages looking for the scanning application which I just installed. Turns out there is no application, instead what you are really installing is the driver. You need to use your own scanning program I use Photoshop.
5) Every time I want to scan something I need to push the Scan button twice on the device to put it into USB scan mode. It would be nice if it would automatically detect how it was going to transmit. Also you have 1.5 to 2 minutes from when you push SCAN twice to when the machine puts itself to sleep. So a few times now I have tried to scan and couldn''t because the SCAN option timed out on the machine.
6) The manual is not Mac friendly. If it was it would have saved me a couple hours figuring out most of the above. I had to call Canon 3 times or so to get the kinks worked out.
But I must say that Canon technical support is bar none the best customer support I have ever experienced. A human will pick up the phone almost immediately and you are speaking to an educated, polite, sympathetic, and a very knowledgeable person who''s first language is english and they live here in the good ol'' USA. A+ on that Canon.
Despite the problems settings this up I am happy with my purchase. As I am the first person to review this I am glad to pass on what I learned to help others make an informed choice and if you happen to buy it I hope that I helped save you some time setting it up.
Thanks!
Buy Canon imageCLASS MF4370DN Multifunction Laser Printer Now
I bought the printer about 3 weeks ago. It prints well, faxes great, but the scanning is where if falls short.It came with the canon software for enabling to scan over the network. The box says it scans at 600 x 1200, but that ONLY from the USB connection. The network scanning limits you to only 300dpi. Customer support says I can get the full 600 if i connect the USB port. But the reason I bought it was to use via the network! Sounds like they weren''t honest in their product description.
I would recommend another printer such as the comparable brother but I have had a lot of bad experiences with my previous brother products so I will stick with this one despite its shortcoming and hopefully wait for a firmware or software up date that will allow the full scanning resolution via the network.
Read Best Reviews of Canon imageCLASS MF4370DN Multifunction Laser Printer Here
Keep in mind, it wasn''t too long ago when you had to purchased a $600+ printer to get the features of this one. Also, I do not like Brother printers. They are the generic brand of printers and have barely been supported by electronic retailers until recently.This is my second Canon laser jet. The first was an all in one (print, copy, scan) MF1330. While it made flawless copies; it had no fax, could only connect to one PC through USB, and lacked the ADF (automatic document feeder). I have three PC''s in my house. Two desktops and one laptop. The two desktops are running 64-bit Vista, and I have searched high and low for a modem that would work with a 64-bit OS. The only ones I found are not natively supported in Vista and cost $80+. The others were all external. If you don''t know this, the Canon laser jets have a very fast first page out time. So when they say 23 pages per minute, it doesn''t mean after a two minute warm up period. When you click print the PC (depending on speed) takes a few seconds plus to process before sending. With my computer, the entire print process took about 5 seconds before the page was being printed. Very nice! Imediately I noticed how quiet this printer is compared to my last canon and my Oki C5200ne color laser. Amazing for a laser jet. I hope they didn''t sacrifice life expectancy or something else to get it.
I was a little disappointed. This printer didn''t turn out to be everything I thought it would be, which is why I only gave it 4 stars. First of all, you must know Windows Fax & Scan does not work with this printer. That is the let down of the year to me, but it''s not Canon''s fault... not necessarily. Turns out WF&S only uses WIA scanning drivers and this printer uses TWAIN. Thanks Microsoft. The computer never directly communicates with the printer, so the faxing is treated like printing. As a result, the faxing portion of the software doesn''t work with it either.
This printer DOES come with software for scanning. It''s burried on the CD, and you must explore the CD to find it. I believe it''s only for the PC, however.As the other poster said, I searched all over for the scanning software I thought I installed. Turns out it was just a driver. I own Adobe Photoshop and Acrobat, so it''s not much of a concern for me. They are both TWAIN compatible by the way. One thing I don''t like about this printer is the need to press the scan button prior to scanning. This is not very convenient for a network printer. It''s even worse if you have a long way to go to get back to your PC. By the time you get there, the thing may have gone back into power saving mode.
Still with it''s flaws, it''s definately a great buy compared to similar products of the past (which were bulkier, louder, and more expensive). It does what it says it can do. Print (double sided at that), scan over the network, fax from your PC, and it''s also voice line friendly! (No need for a dedicated fax line)It''s a great buy.
Want Canon imageCLASS MF4370DN Multifunction Laser Printer Discount?
I dont usually review stuff on amazon, but I''m going to pause for a minute and give this baby its due praise. I bought this a few months ago to replace an inkjet MFP that simply was not up to the job of being a cost efficient, fast, reliable MFP for my legal research projects (can involve printing several 25-50 page double sided print jobs). This thing simply put, works. And thats saying something b/c I have a household that uses both Mac and Windows machines and both connect to it flawlessly over the network and print with blazing fast speed, while saving paper by printing double sided. On top of that the scanner functions work over the network (only on the windows machine as of today, but canon promises me there will be a software update to correct this soon). Finally the toner use is fairly average as I get probably 2500 text pages per toner cartridge, and I will note that I have experimented with the generics offered by 3rd party companies on amazon and it works perfectly still and considerably cheaper ($70 vs. $25 for the generic). Over all I highly recommend this printer if you need a fast laser MFP that works over the network and with a mixed Mac and Windows environment.
Other reviewers had problems w/scanning. I did too at first but after a call to tech support, it works fine. The problem with the scanning was due to the install CD only installing the driver but not the included OmniPage software. To get to that, you have to manually view the contents of the CD and go to the directory OmniPage and install it yourself (setup.exe). The included scanning software is ScanSoft OmniPage SE 4.2.
My initial network setup resulted in intermittent printing (it''d work for a few days then stop) and so the tech guy had me manually enter the IP address, subnet mask and disable DHCP.
It all works great now, it''s fast printer and much more energy efficient than my other one. It''s a great buy for the money so much better than inkjets (and those $$ cartridges that only print well the first few times).
0 comments:
Post a Comment