- Up to 25ppm color and black printing
- Automatic duplex printing
- Up to 2400 x 600 dpi resolution
- 10/100 Base-TX Ethernet and Hi-Speed USB 2.0
- High-yield 6000-page black and 3500-page color replacement toner cartridges available
One main feature I want out of a color laser is duplex printing. I decided to try Brother HL-4150CDN because it was sold for $250 on Amazon.com (surprised to see the price went up to $370 after I bought). It has duplex printing and claimed to be fast. Well, it is fast, the fastest of all color printers I have every owned. Even though it is loud when it prints, you hear only a few seconds of noise and then it''s completely quiet.
One star was removed because of the color. It is dry, unlike the shiny output from the HP. I don''t really mind the dry color. The real problem is the colors being too dark. I tried some adjustment on the configuration and it has improved but still darker than the original, or HP output. That also means I am consuming more toner. I''ve got it for a week, and I don''t think I have printed so much, but the yellow toner is show half left.
I am trying to figure out color calibration, which I''ve never needed to do with my previous printers. I hope it helps. There is a toner saving mode, I can''t find how to set it yet, but I hope that helps. Maybe at the toner saving mode it will give me a lighter but correct colors.
--Update---
The yellow color showing half full was not correct. It shows that way when you look at the printer admin page from the browser, but the digital window on the printer shows full. I did a calibration, but it appears to be perfectly calibrated from the factory. I set the printer to "Toner Saving" mode and set the frequency to "Low" (I don''t know what this means). Then the color has lightened but still a little darker than the HP out put.
Buy Brother HL4150CDN Color Laser Printer Now
I bought this printer 1 week ago. As per one of the other reviewers, this unit has some heft to it. It comes with full cartridges, not starter cartridges. The color and sharpness are excellent. I''ve been using a monochrome HP 1020 laserjet for the last few years. there''s a definite improvement in the sharpness of the text. When the machine comes out of its sleep mode, it is louder than I anticipated, and was even a bit shocked at first. Also, it takes about 15 sec to print its first page. I got this for about $280 through Staples and am pleased with the price paid and the performance of this unit. I expect many years of use, which is strictly in the home setting. Setup was simple. This is networked to my home network though an ethernet cable. I have 1 computer running Window 7 and 2 others running Win XP home. all of them found the printer on the network without any glitches. It was much easier to set up than trying to "share" a non-networked printer. I gave it 4 stars because of the noise level. In fairness, I have nothing to compare it to in its class. For the money paid, I think this is a better built unit than the HP 2025, which also costs more, and the cartridges for the HP cost twice as much as the Brother, though there is no drum to replace in the HP since the drum function is built into each cartridge, hence its price. A new drum for this brother runs about $150 but i don''t expect that it''ll need replacing for few years or so. I can live with that! Hope this helpsRead Best Reviews of Brother HL4150CDN Color Laser Printer Here
This is a new printer from Brother and I was a little nervous because there were no reviews for it. Bought this printer locally for $299 plus a $50 trade-in, bringing my price to a very reasonable $250 plus tax. First, it is a sizable printer, so you need some room for it. It is also fairly heavy, which hopefully implies a more substantial product. None of the parts, such as the paper tray or manual feed extension, feel flimsy at all. Setup instructions were trivial and I was printing in under 30 minutes, including assigning an IP address.I used the CD to install the print drivers on two windows 7 machines and they installed successfully with no issues. The printer comes with four starter cartridges and the print quality is very sharp, IMO.
I will provide additional updates as I use this printer more, but after 7 days and 100 pages of printing, I am extremely pleased with this printer!
Update 1/19/2011. Machine continues to operate well. I guess Brother must have changed their toners to full toners (or Office Depot had a different SKU with starter cartridges). Either way, I definitely got starter cartridges included with mine. I haven''t printed much since the first review, but I am now replacing toner cartridges. I have about 125 pages printed and all of the color cartridges are blinking (meaning low cartridge). And yes, I was stunned to see that the replacement high yield cartridges are retailing at ~$120 each! I just bought four off of ebay for about $85 each, which is still not cheap. However, these cartridges are rated at 3,500 pages (and 6,000 for the black), which works out to about $.09 per page for toner. If they last this long, then this will be a pretty good deal. If you are going to buy this printer, check to see if you are getting full cartridges! It''s worth paying a bit more for the printer, IMO.
My advice
Want Brother HL4150CDN Color Laser Printer Discount?
I purchased the Brother HL-4150CDN color laser printer one day ago. It prints fast. The test page which consists of very, very simple, small, solid blocks of color and type, printed great! But it was printing only pure yellow, pure magenta, pure cyan. That is not a test of whether the printer prints well if it needs to print any other color. I have had good luck with other brother products in the past. But this one not so much.I am printing out complex graphics and bought the printer because I read reviews stating that it had the best graphics and the one of best photo printing results for a laser printer. But the first print, and every print I tried, was very dark, had an uneven sheen to it, and anything that was tan or pink was absolutely magenta. The blues, which should have been light blue, were dark electric blues, It was not usable. I had printed the same graphic file the day before with a Cannon laser printer and it was what you would expect from a laser printer... slightly saturated, but perfectly acceptable. The color on the HL-4150 CDN is totally wrong. I am very disappointed. I tried to call Brother 4 times and each time I was greeted by an automated attendant, put on hold for quite a while (30 to 40 minutes) and when I finally connected to a human being, they put me on hold and I was then disconnected. That happened every time. I was unable to get any help from Brother. I tried adjusting settings on the printer all to no avail. Went on line looked at the manual no help. It maybe good for simple pie charts where the color accuracy is irrelevant, but If you need to print more complex color graphics I''d have to say, this is not a good printer at all. I am returning mine.
Save 21% off
This printer is fast. It prints 25 pages per minute and it has duplex printing. This is especially useful, since the printer will automatically print on both sides of the paper should you want it to, saving a lot of paper. Others have said that the color reproduction is not great. To clarify these statements, I would say that the color is not great for professional photographers or those who require precise color printing. Despite this, the color printing quality should not be a problem for everyday prints, such as school/work reports, personal projects, etc.I have noticed 2 drawbacks:
1. The printer was bulkier and heavier than I expected. Make sure you check the printer''s dimensions/weight to make sure you know what you''re getting.
2. The printer is somewhat loud when printing, but quickly dies down after it is done printing.
Some useful hidden features:
---------------------------------
TO RESET TONER LEVELS:
1. open front cover
2. press the CANCEL and SECURE buttons together at the same time
3. use the +/buttons to navigate the toner color menu
4. press OK to reset the selected item
TO RESET DURABLE PARTS LIFE (drum, belt, etc.)
1. open front cover
2. press the GO and + buttons together at the same time
3. use the +/buttons to navigate the menu
4. press OK to reset the selected item
0 comments:
Post a Comment